Contact Platform Support
Help CenterDiameter20*330mm in Surface Rough Grinding Tungsten Steel Blank Rod
Related Products
-
Surface Grinding Tungsten Steel Circular RodUS$ 69.5 - 75MOQ: 10 Kilograms -
Surface Grinding Tungsten Steel Circular BarUS$ 69.5 - 75MOQ: 10 Kilograms
-
Factory Suply Surface Grinding or Blank Hard Alloy RodUS$ 65.5 - 69.5MOQ: 1 Kilogram
-
Factory Rods OD18*330mm High Quality Compititive Cemented Carbide Surface Grinding RodUS$ 65.5 - 69MOQ: 5 Kilograms
-
Carbide Ground Rods for End MillsUS$ 69.5 - 75MOQ: 10 Kilograms
Zhu Zhou Chuntian Cemented Carbide Co,.Ltd. is a high-tech enterprise of producing cemented carbide products.
we supply premium grades tungsten carbide rods in unground,centetless ground and polished form.reconmented grades for tungsten carbide rod:YG6,YG6X,YG8,YL10.2 etc.
our carbide rods have a good shock resistance and bending resistance in use.if you have any demands on carbide rods ,please do not hesitate to contact us.
Grade |
Density g/cm3 |
T.R.S Mpa |
Hardness HRA |
Grain Size µm |
Performance&Application |
Equivalent to ISO |
|
YG6X |
14.95 |
2600 |
92.0 |
1.0 |
For making all kinds of carbide rotary cutting tools which are used in cast iron, hot resistant alloy steel, non-ferrous metal and nonmetal. At the same time it can be used for wear resistant parts. |
K10 |
|
YG8 |
14.70 |
2800 |
90.0 |
1.2 |
For making carbide wear resistant parts, rods and molds, meanwhile it can be used for semifinishing and finishing cutting tool at low speed for cast iron, nonferrous metal, nonmetal material. |
K20-K30 |
|
YL10.2 |
14.50 |
4000 |
92 |
0.6 |
It is suitable for indexable tool with submicro gain size with wide application. Used for processing of stainless steel, hot resistance steel, Cr, Ti, Ni alloy, synthetic material, non metal material , alloy steel even woods. |
K20-K30 |
details photos:
factory and some machines of rods:
Send Inquiry to This Supplier
You May Also Like
-
Angle Grinder Universal Woodworking Tools Starlock SawbladesNegotiableMOQ: 20 Pieces
-
Beckhoff EL3162 EtherCAT Analog Input Terminal 2-Channel 0-10V Voltage Input Module 16-Bit High Precision I/OUS$ 280MOQ: 1 Piece
-
General Parts & ComponentsNegotiableMOQ: 2700 Pieces
-
1/2 Inch Quick Change Hole Saw Arbor for Power ToolsUS$ 1 - 30MOQ: 648 Pieces
-
Tungsten Carbide Inserts LatheUS$ 1 - 1.5MOQ: 100 Pieces
-
BladesUS$ 2 - 2.5MOQ: 5 Pieces
-
Masonry Router Bits For WoodUS$ 1 - 4.8MOQ: 100 Pieces
-
Modelling Ball Tools Double Sided Bone Carving Tools 8 Different Sizes IncrementsUS$ 1 - 100MOQ: 100 Pieces
-
Item No.: STA4252 Cutter&BladeUS$ 1.5 - 1.55MOQ: 2000 Sets
-
Non Sparking Tools,flange Prop,hand Tools,power Tools,ISO9001,UKASUS$ 46.87 - 4,613.3MOQ: 1 Piece
