Contact Platform Support
Help CenterPolished Tungsten Carbide Cylinder Boring Bar YL10.2
Related Products
-
Tungsten Carbide Grouding Rod for End Mill YL10.2US$ 4 - 6.5MOQ: 1 Piece -
China Factory Tungsten Carbide Boring Bar, 2014 New Products Cemented Carbide Round RodUS$ 4 - 6.5MOQ: 1 Piece
-
Diameter1.2mm*length330mm Tungsten Steel RodUS$ 0.9 - 1.2MOQ: 50 Pieces
-
High Quality Diameter20*330mm in Surface Rough Grinding Compititive Tungsten Steel Blank RodUS$ 65.5 - 69MOQ: 5 Kilograms
-
High Quality Compititive Tungsten Steel Blank Rod Diameter5*330mmUS$ 65.5 - 69MOQ: 5 Kilograms
polished tungsten carbide cylinder boring bar YL10.2
material of tungsten carbide rod introduction
Grade |
Density g/cm3 |
T.R.S Mpa |
Hardness HRA |
Grain Size µm |
Performance&Application |
Equivalent to ISO |
|
YG6X |
14.95 |
2600 |
92.0 |
1.0 |
For making all kinds of carbide rotary cutting tools which are used in cast iron, hot resistant alloy steel, non-ferrous metal and nonmetal. At the same time it can be used for wear resistant parts. |
K10 |
|
YG8 |
14.70 |
2800 |
90.0 |
1.2 |
For making carbide wear resistant parts, rods and molds, meanwhile it can be used for semifinishing and finishing cutting tool at low speed for cast iron, nonferrous metal, nonmetal material. |
K20-K30 |
|
YL10.2 |
14.50 |
4000 |
92 |
0.6 |
It is suitable for indexable tool with submicro gain size with wide application. Used for processing of stainless steel, hot resistance steel, Cr, Ti, Ni alloy, synthetic material, non metal material , alloy steel even woods. |
K20-K30 |
size according to customer's requirement
packing information
workshop show
payment terms
T/T PAYPAL WESTEN UNION ESCROW
factory main products of tungsten carbide
Saw Tips
Buttons for Rock Bits
Inserts for Road Milling, Plaing Bits
Inserts for Coal Cutter Picks
Inserts for Snopw Plow Blades
Inserts for Mining Tools
finished or blank Round Rods (dia from 1.0 to 25.4 mm,length 1.0 to 330mm)
Carbide Tubes
Carbide Rings
Carbide strips and plates
Carbide tips for Debarking Bits
Brazed Inserts or Tips
Carbide pins
Tire studs
Carbide Blanks
Carbide Wear-Parts
carbide circular cutter
alloy welding material,etc.
Send Inquiry to This Supplier
You May Also Like
-
Chromium Alloy Cast Grinding Balls Cr 1%-30% High Hardness Low Breakage For Mining Ball Mill Cement PlantUS$ 600 - 2000MOQ: 27 Metric Tons
-
WODON High Wear Resistance Truck Inner Liner PlateUS$ 150 - 150MOQ: 1 Square Meter
-
Wear Resistance YG6/ YG8 Tungsten Carbide Wire Drawing DiesNegotiableMOQ: 1
-
Apv Tungsten Carbide SleevesUS$ 0.5 - 20MOQ: 20 Pieces
-
Wire Drawing DiesUS$ 10 - 30MOQ: 1 Piece
-
High Wear-Resistant Grinding Rods for Mining Rod MillNegotiableMOQ: 25 Metric Tons
-
Polymer Road Panel Temporary Road PanelUS$ 11 - 13MOQ: 500 Kilograms
-
ISO Standard and Best Price Carbide Tips Ss10 Carbide Stone Cutting TipsNegotiableMOQ: 20 Kilograms
-
UHMWPE Black Leg Pads for Heavy Machinery, Wear-resistant, Anti-slip, and High Load-bearingNegotiableMOQ: 1 Piece
-
Grinding Rod, Steel Grinding Bar, Grinding Bar, Grinding Ball, Forged Steel Grinding Ball DIA20-150MMNegotiableMOQ: 25 Metric Tons
