Contact Platform Support
Help CenterSales Promotion!! Epoxy Floor Polishing Machine Diamond Floor Grinder
Related Products
-
Hot Sale!! Epoxy Planetary Grinding MachineUS$ 610 - 820MOQ: 1 Set -
Electric Concrete Grinding and Removing Machine for Epoxy FloorUS$ 610 - 820MOQ: 1 Set
-
2016 Full New Clean Epoxy Grinding Machine / Concrete Floor Grinding MachineUS$ 610 - 820MOQ: 1 Set
-
In Stock !! Hand Floor Polishing Machine/ Epoxy Diamond Floor Grinding MachineUS$ 610 - 820MOQ: 1 Set
-
Factory Price !! Diamond Grinder For Concrete Epoxy Single Plate Floor Grinding MachineUS$ 610 - 820MOQ: 1 Set
Epoxy floor polishing machine
1.with grinding /vacuuming integration , Operation dust-free
2. Adjust the height of equipment,and always ensure that mechanical work under level state .
3.High efficiency and energy saving dynamic system,compact and sophisticated manufacturing technology .
4.Free to replace the chassis ,consumables free configuration (diamond grinding wheel).
5.Only with a reversing switch ,toggle switch can be changed motor direction of rotation .
6. The other is equipped with vacuum motor, not dust in the construction process, the operation is simple, portable,which is the best choice of the epoxy construction
1. Remove the machine from the box and lay it flat.
2. Remove the motor cover and check the belt tightness. If the belt is loose, pressed down the handle to tilt the chassis, chassis four fixing screws relax, tightness and sheet metal hand tightened following the push bolt until it reaches the specified, then the shell is installed.
3. Chassis tilt, exposed triangular discs, the grinding head is installed on a triangular plate is fixed, then the outer skirt to the appropriate location.
4. Put the machine flat, ensure three diamond grinding heads of the triangle plate and rear wheels in a plane.
5. Plug in power supply, rotating switch starting the machine. If the dust is out, then the switch is rotated to the middle stop stat, the rotation goes to the opposite direction and then run normally.
6. After the machine starts, according to the ground strength and processing effect to choose the appropriate speed uniform propulsion.
7. Mechanical operation about 10 minutes can be stopped mechanically, then reverse to the dust on the filter removed, in order to achieve the better effect of the dust. Running 50 minutes will mechanical stop, turn on the vacuum cleaner, silo dust clean.
8. In operation, there is any abnormal phenomenon please stop the machine immediately, then check the end can be re used.
Our factory
Our team
Our certificate
Welcome to our factory
Contact person: Sally
E-mail: hw011@
Tel/Whatsapp: +008613608916725
Trademanager:cn1501451493
Skype: 2742877292@
Send Inquiry to This Supplier
You May Also Like
-
Stainless Steel Flat Metal Polishing Machine With Two Stand and Dust CoverNegotiableMOQ: 1 Set
-
Rotomolding Cleaning Machine,rotational Moulding CleanerNegotiableMOQ: 1
-
Scratch Repair Pro PenNegotiableMOQ: 3000 Sets
-
SIMONIZ Fix It! Scratch Repair Scratch Remover Lowes Polisher Car Buffer Car Polisher MachineUS$ 1 - 100MOQ: 100 Pieces
-
Cordless Car Polisher, Car Cleaning and Waxing SetUS$ 15 - 30MOQ: 1
-
KMJ-107 560w With High Speed 10000r/min Air Angle Grinder ,power ToolsNegotiableMOQ: 100 Pieces
-
1200w Car Polisher Waxing Machine/ Floor Polishing Machine Electric Polisher Power ToolsUS$ 35 - 63MOQ: 10 Pieces
-
163505 8",9",10" Orbital Electric Car Polisher Buffer Kit With Polishing & Buffing Bonnets Car PolisherUS$ 9.58 - 12.63MOQ: 1000 Sets
-
Mini Car Polishing MachineUS$ 10 - 20MOQ: 300 Pieces
-
Machine for Polishing the CarUS$ 8 - 18MOQ: 200 Pieces
