factory price coal briquette machine/charcoal briquette machine/coal briquetting machine in China

   factory price coal briquette machine/charcoal briquette machine/coal briquetting machine in China

Introduction 

Ball press machine is one kind of machines used to press coal powder, charcoal,iron powder, coke, aluminum powder, sludge, kaolin, activated carbon,cole breeze and other powder and waste material into briquettes. These briquettes can be made with different shapes of goose egg shape,oval shape, pillow shape, square shape and so on. This machine is widely used in refractory, power plants, metallurgy, chemicals, energy, transportation, heating, etc.

Structures 

ball press machine consists of three parts: feeding part, transmission part and molding part.
1.Feeding part achieves dosing feeding to ensure access to the material evenly between the rolls.
2.Transmission part, main drive system are: motor -- triangle belts--reducer--open gear--roller.
3.Forming part mainly refers to the host part and its core part is the roller.

Working principles 

1.ball press machine transmits the power to two pressure rollers through reducer and makes them rotate in opposite directions.

2.In two pressure rollers rotation, materials naturally enter into the ball molds on pressure roller and materials pressure vary from small to large with the rotation of the pressure roller.

3.When materials are rotated to two rollers line contact points, materials pressure has reached a peak. Powder materials are suppressed into finished ball under enormous pressure .

Technical data

Features and advantages 

1. The roller is made by hard materials with good wear resistance and long life time.

2. The service life of wearing parts is up to 4000 hours.

3. The machines electricity coal reduce by 60%.

4. The machine is easy to operate and maintain.

5. The molding materials are energy saving, easy to transport and higher utilization of waste.

6. The final products are smokeless, non-toxic, none peculiar and environmental protection.

7. The end outlet shape of products can be oval, round, square, ball egg-shaped and pillow shaped