300ml Silica Gel Filling & Pressure-cap Sealing Machine

300ml Silica Gel Filling & Pressure-cap Sealing Machine

Introduction:

300ml Silica Gel Filling & Pressure-cap Sealing Machine is used for the ration filling & sealing of the silica gel into the plastic tube, this machine ravel out the measure inaccuracy, tow tail and the wire drawing, this machine have the inert gases filling set that make the silica gel don’t solidify at the fill course and the deposited course. Also have the air drive to plunger, make sure the sealing tightness.

Specification:

1. Voltage:        AC220V

2. Filling Speed:   10-15tube/min

3. Filling quality:   200-300ml

4.Tube diameter : φ40-φ50mm

5.Pneumatic pressure : 4Kg/cm²

6.Weight :           100Kg

7.Dimension:         500×500×1900mm

8.Air consumed:       0.3M³/min

300ml Silica Gel Filling & Pressure-cap Sealing Machine

Introduction:

300ml Silica Gel Filling & Pressure-cap Sealing Machine is used for the ration filling & sealing of the silica gel into the plastic tube, this machine ravel out the measure inaccuracy, tow tail and the wire drawing, this machine have the inert gases filling set that make the silica gel don’t solidify at the fill course and the deposited course. Also have the air drive to plunger, make sure the sealing tightness.

Specification:

1. Voltage:        AC220V

2. Filling Speed:   10-15tube/min

3. Filling quality:   200-300ml

4.Tube diameter : φ40-φ50mm

5.Pneumatic pressure : 4Kg/cm²

6.Weight :           100Kg

7.Dimension:         500×500×1900mm

8.Air consumed:       0.3M³/min