358 anti-climb microgroove security fence(factory)

Specifications

358 anti-climb microgroove security fence.
Material:low carbonsteel wire
Finish:powder coated
Advantage:anti-climb,anti-cut

358 anti-climb microgroove security fence(factory)

 

Popular Specification 

 

 

 

Mesh size	Wire diameter	Width	Height	Post height	Post type	Fitting
1 / 2' X 3' (12.7 X 76.2 mm)	3.0mm 3.5mm 4.0mm	2000mm 22000mm 2500mm	1000mm 1200mm 1500mm 1800mm 20000mm 2200mm 2400mm 3000mm	1400mm 1600mm 2000mm 2300mm 2500mm 2800mm 3000mm 3800mm	"C" post   round post  square post Rectangle post	Flat bar

 

 

 

 

Typical applications
· Industrial and commercial sites
· Airports, railways, schools, local authorities
· Public utilities, military
· Secure units & prisons

 

 Benefits
· Unsurpassed welded mesh panel security
· A range of heights up to 5.2 metres
· Anti-climb, anti-cut
· Attractive appearance
· Vandal resistant
· Quick and simple installation

 

 Cost effective
· Low maintenance
Standard System
Extreme Mesh panels
The Extreme panels have a mesh size of 76.2 x 12.7 mm formed from 4 mm vertical and horizontal wires welded at every intersection.
Extreme posts
The Extreme posts range from 50 x 50 to 120 x 60 rolled hollow section (RHS) with plastic caps based on fence height. A full-length 40 mm wide clamp strip with M8 cup square bolt and Permacone nuts at 300 mm (approx) vertical centres, ensure a secure anti-vandal fixing.
(Fig. 2 Extreme clamp strip)
FenceTek Gates
Gates of all sizes and configuration are manufactured to the highest standards and maintain the site security offered by the fences. Swing, sliding cantilever and bi-folding gates are offered for manual use or automated by the specialist department of FenceTek Limited. The Gate Automation Department can offer a high quality and reliable 'Speed Gate'.
Technical / installation
Standard heights: 1800 mm, 2100 mm, 2400 mm, 3000 mm, 4200 mm, 4800 mm and 5200 mm.
The Extreme 358 security fence System can be manufactured upon request to suit projects requiring:
· Bolting down
· Wall mounting
· Burying
· Additional security toppings

Company introduction :

Anping SHENGWEI Wire Mesh Manufacturing Co., Ltd was found in 2003.We are located in Anping, Hebei--"the Base of Wire Mesh Products".

10 years experience , strictly Quality control , high quality and service assure our products exported to America,Europe,South-east Asia and Africa.