Contact Platform Support
Help CenterENGINEERING MACHINE RUBBER TRACK / EXCAVATOR RUBBER TRACK
Related Products
-
Rubber Track for Kubota Harvest MachineUS$ 50 - 300MOQ: 50 Pieces -
Small Rubber Track for RobotUS$ 50 - 300MOQ: 50 Pieces
-
MINI EXCAVATOR RUBBER TRACK / ATV RUBBER TRACK USEDUS$ 1 - 80MOQ: 50 Pieces
-
RUBBER TRACK FOR AGRICULTURAL HARVEST MACHINE, 450X90X50US$ 260 - 500MOQ: 50 Pieces
-
RUBBER TRACK FOR AGRICULTURAL HARVEST MACHINE, 450X90X35US$ 260 - 500MOQ: 50 Pieces
Specifications
RUBBER TRACK1- Certified by ISO9001:2008, quality guaranted
2- OEM quality to Kubota, Hitachi, Komatsu ,Volvo, ETC
Rubber track
The traditional rubber track normally take lap joint production technology, it was easy to get stretch, to slip between steel cord and belt carcass, and the pitch distance is not keep all the same. Besides that, the integral tensile strength is low. However, the endless production technology is the best solution to improve those defects.
ATTENTION
1- Check the tension after the track belt installed, it will be failure if too tight or loose. Generally, the sag distance of the center roller is 10 to 15cm to belt when lift the machine.
2- Avoid quickly starting or turning the machine on the scraggly ground.
3- Keep the rubber away from oil and grease, wipe off immediately while it is oil stained.
4- To avoid collision between the rubber track and other components of the machine, especially its inner edge.
5- Don’t using badly worn driving wheel, because it may damage the iron teeth of the rubber track.
6- If the machine is unused for a long time, the rubber track should be removed and cleaned, and kept well indoors to avoid sunlight and wetness.
7- Due to the track belt was made by rubber, the perfect working tempature is between -25 to 55 degree. However, it can meet the needs out of the range if made by special rubber and material.
Send Inquiry to This Supplier
You May Also Like
-
Engineering & Construction Machinery PartsNegotiableMOQ: 2500 Sets
-
SDLG Original 29070013181 Shim for LG Machinery With Good Price in StockUS$ 10 - 80MOQ: 1 Piece
-
Pressure Sensor 803594130 for XCMG Excavator Hydraulic System Genuine OEMUS$ 1MOQ: 1 Unit
-
Excavator Rock Sieve Bucket 1350mm 1500mm for CAT330 CAT336 Excavators Heavy Reinforced Skeleton Bucket With TeethUS$ 1500 - 3500MOQ: 1 Piece
-
Chromium Carbide Overlay Wear Plate Excavator Crusher Bucket LinerUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
High-Performance GT2263KLNV Turbo Charger for Hino Engineering/commercial VehiclesUS$ 540 - 560MOQ: 1 Unit
-
48-17 Excavator Spare Part for Pump Drive System YNF18405NegotiableMOQ: 1 Piece
-
Original MTU Engine Spare Parts 5530900261 FLAPNegotiableMOQ: 1 Bag
-
Excavator Piston Pump PC05-6 PC20 PC30 PC200-6 PC200-7 PC220 PC240 PC400 PC450 High Pressure Hydraulic Pump for KomatsuNegotiableMOQ: 1 Combo
-
Connector Sealing up Pipe Stop Water Hexagon Threaded Protection Hard PlugsNegotiableMOQ: 100 Pieces
