Contact Platform Support
Help CenterSilicone Sealant G1200 Msds Anti-pollution Flashover Coating
Related Products
-
Silicone Sealant Cartridge Anti-pollution Flashover CoatingUS$ 1 - 100MOQ: 1 Barrel -
Kangdawei Silicone Free Sealant Anti-pollution Flashover CoatingUS$ 1 - 100MOQ: 1 Barrel
-
Silicone Sealant G1200 Anti-pollution Flashover CoatingUS$ 1 - 100MOQ: 1 Barrel
-
Silicone Sealant Raw Material Anti-pollution Flashover CoatingUS$ 1 - 100MOQ: 1 Barrel
-
Silicone Sealant Msds Anti-pollution Flashover CoatingUS$ 1 - 100MOQ: 1 Barrel
Anti-pollution flashover coatings is a new type silicone coatings. It can be long-term stored in sealed container and cured by absorbing moisture in the air. This product is neutral, has good adhesion performance to insulator, excellent electrical insulation performance, resistance to damp, resistance to corona. Besides, the cured coating has excellent migration performance of hydrophobicity, resistance to UV, rain and hail, excellent outdoor aging resistance performance and long service life. It is mainly used for high voltage line insulators surface of external insulation.
1.Low viscosity, easy to spray, strong operability
2.Good migration performance of hydrophobicity, resistance to water and damp
3.Excellent electrical insulating performance and aging resistance performance
Test item |
Index |
||
Uncured |
Color |
Red/White/Gray/Blue/Translucent |
|
Viscosity(S) |
80~120 |
||
Tack free time(25℃,min) |
≤45 |
||
|
Cured |
Mechanical performance |
Tensile strength(Mpa) |
≥1.5 |
Tensile elongation(%) |
≥150 |
||
Shear strength(Mpa) |
≥1.2 |
||
Tear strength(KN/mm) |
≥3.0 |
||
|
Electrical performance |
Dielectric constant(1MHZ) |
≤4.0 |
|
Tangent of dielectric lose angle(1MHZ) |
≤4.0×10-3 |
||
Volume resistivity(Ω·cm) |
≥1×1014 |
||
Dielectric strength(KV/mm) |
≥18 |
||
Fire resistance |
FV-1 |
||
1.Use dry cloth to clean the surface of insulator before using, then it can be operated in good weather.
2.Spray on clean and dry surface when operating, the coating thickness should be over 0.25mm, holidays should be avoided.
3.The tack free time would be about 30 minutes, and the completely cured time would be 24 hours after operation.
Send Inquiry to This Supplier
You May Also Like
-
Thermoplastic Polyurethane TPU Resin For Fire Hose TPU GranulesUS$ 2.22MOQ: 1 Kilogram
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
Best Quality Cheapest Animal Shape Silicone Rubber Oven MittsNegotiableMOQ: 2000 Pieces
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
-
Mmodified Corn StarchUS$ 675 - 705MOQ: 10 Tons
