decorative plaster cement mortar for wall

ANT-901 decorative plaster cement mortar for wall ,it is a new-style finishing mortar, which is developed independently by our company according to the development of building insulation in our country in recent years. This product has many kinds of colors for your choice, it can be constructed a series of different decorative effect(such as tile effect, culture stone effect) through different moulds or constructive methods, it appears various colors, patterns and textures, it simulates realistically the natural material and stripes to delineate a range of designs, it helps people with realizing the ideal of buildings getting along with human environment and the natural environment harmonically. This product is very stable and durable because using of iron oxide- inorganic dye, it reduces the second coating cost due to its long working life, compares with tiles, it has same effect and reduces the cost as well as the load of outside insulating system to ensure this system is more safe and reliable.   It’s non-pollution, nontoxic and environmental material.

The technical performance

1, excellent binding property 2, good weather resistance

3, good crack resistance 4, no shell and peeling 5, beautiful and natural color

Applicable Scope    

It’s applicable to insulation surface of interior and exterior wall, cement mortar, concrete, plasterboard Eterpan, and the interior and exterior walls for bulding.

The base surface requirements:   

The base surface should be dry, solid, smooth, no crack, oil pollution and dust.

The mixing and coating technique

Spray by electrical treater:

the mix ratio of mortar powder to water is1: 0.35

please pour the clean water into vessel and mix with mortar and stir by electrical treater at the same time until it becomes fluid adhesive cement, keep it still for 5 minutes, stir slightly again for using.

1,the pressure is in control of 0.4-0.6MPa,spray evenly the mortar on the working surface by spray gun.

2,the thickness is in control of 1.5-2mm,the volume of mortar is 2-3kgs per square meter.

3,remove the adhesive sticker after the adhesive cement concreting initially.

4,finishing spray 24 hours later ,please spray cover agent one time or twice to achieve bright effect.

Spray by hand:

the mix ratio of mortar powder to water is1: 0.25,stir the mortar by electrical treater until it becomes even paste, keep it still for 5 minutes, stir slightly again for using.

1,spray evenly the low-level mortar on the base surface by trowel, the thickness of mortar is in control of 1.5-2mm,the volume of mortar is 2-3kgs per square meter.

2,stick the separate tapes after 24hours,the base surface should be dry, no dust, no pollutant before sticking. The working base surface should be divided into multi-checks by spring line.

3,spray the finishing mortar after finishing the sticking work of separate tepes,

tear off slightly the tapes and polish the rough edge by abrasive paper after the surface of mortar is dry.

4,finishing spray 24 hours later ,please spray cover agent one time or twice to achieve bright effect.

Attention:   

You should watering and curing if you find the waterproof layer becomes white.

There’s should no crack and drum after the complete construction.

Divide the tapes carefully to avoid destroying the finishing mortar.

Please form one time when spray by hand, don’t spray again and again, the connections of plasterer should be in accordance with the separate stripes in order to ensuring the whole effect.

Storage and packing:  

This product can be stored for 9 months under seal in cool and dry place. packing: 25 kgs/bag, 22 tons per 1x20' container.

Delivery time:4 days after the receipt of deposit.

Payment terms:L/C,T/T.