CE ROSH aluminium chinese 18w t8 led tube 1.2m hot jizz tube

Specifications:

RMS T8 LED Tube Advantage

   1. SMD2835 LED Package:          

1. Taiwan Epistar SMD2835, each pcs lumen can reach 22-24lm, long lifespan and low light decay;

2. Japanese DOW CORNING brand glue, it is expensive 3-4 times per kilo than the common glue available in the market. High light transmittance, anti-oxidation performance is strong.

3. USA Intermatix brand phosphor powder, improve the brightness, lower light degradation.

4. The diameter is 1.2 mil 99.99% Gold wire, with excellent thermal performance.

   2. LED Lifespan:                   

1. LEDs Qty: 1200mm-18W-120pcs; 600mm-9W-60pcs, use more LEDs than other supplers, more brighter, expand the.

2. LM-80 lifespan test report for the LEDs, which is issued by the third-party certification body authorized by EPA, after lighting up to 7000 hours at a certain working temperature, the luminous efficiency maintenance rate of LEDs can not lower than 91% , its lifespan can be guaranteed.

   3. LED Driver:                   

 IC Constant Current LED Driver, AC90-285V, provide high power factor and power efficiency, have function of short circuit, over-voltage, over-load and high temperature protection.

   3. Heat Sink:                   

Thick PCB Board and thicker 6063 Aluminium alloy heat sink for good heat dissipation, the heat is taken to the fins of heat sink quickly and evenly, to expand the lifetime of led tube.

   3. PC Cover:                   

Japan Teijin flame retardant material, high transmittance reach 95%, no easily to get aging yellow, soft lighting, no black spot.

  All of these comparing with others:                             

  RMS T8 LED Tube Light  Specifications:

Model	Power	Input Voltage	Lumen	Quantity of LEDs	Beam angke	CCT	CRI	Material	Cover
RMS-T8AA600 -10W	10W	AC90-285V	600-660LM	60pcs	120	3000-6500K	>80	PC+6063 Aluminium	Frosted/Clear
RMS-T8AA1200 -18W	18W	AC90-285V	1800-1980LM	120pcs	120	3000-6500K	>80	PC+6063 Aluminium	Frosted/Clear

RMS T8 LED Tube Light Show:

2.Well-trained and experienced staffs to answer all your enquires in fluent English

3.OEM & ODM, any your costomized lighings we can help you to design and put into product

4.Distributers are offered for your unique design and some our current models

5.Protection of your sales area ,ideas of design and all your private information

Q:    Can I have a sample order?

A:    Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q:    What is the lead time?
A:     Samples need 3-5 working days, mass products need 7-10 days.
Q:     How do you ship the goods and how long does it take arrive?
A:     Express(DHL,UPS,Fedex or TNT.), Air or Sea shipment is available depends on your need. It usually takes 3-5 days to arrive except Sea transportation.

Q:     How to precede the order if I have logo to print?
A:     Firstly, we will prepare artwork for visual confirmation, and next we will produce a real sample for your second confirmation. If mockup is ok, finally we will go to mass production. 
Q:     How to deal with the faulty?

A:     Firstly, our defective rate is less than 0.2%, so there is no big problem to the lights. Secondly, we usually offer 2 years warranty for our lights. Thirdly, during the guarantee period, we will resend new lights with the new order for small quantity. If there are many lights don't work, we can repair them, then resend them to you.