Wholesale kitchen combination knife sharpening stone

color box for the combination knife sharpening stone

Wholesale kitchen combination knife sharpening stone

1.Description and pictures of   combination knife sharpening stone

Size: 180x60x28mm, 200x50x25mm, 150x50x25mm

Availabe grits:  #240/#800, #600/#1500, #1000/#4000, #1000/#6000, #2000/#5000,#3000/#8000

#180/#320, #400/#1000.

The grits and sizes can be done as per the customer's requirements.

Coarse/Fine Combination Whetstone Feature

1. Two sides whetstone finely hones knife edges

2. Hard enough for quick, easy and durable work

3. To be able to be used immediately after wetting

4. Suitable for woodworking and  kitchen knives and precision industrial knives.

Sharpening Instruction

1. Soak the stone in lukewarm water for a few minutes. As soon as the air bubbles stop rising the stone is ready for use. Please continue to apply water also during the sharpening.

2. Place the stone on a non-slip workshop and make certain that the surface is flat. Start by using the coarse grit(of the stone.

3. Move the blade back and forth over the stone at an angle of 10 - 30 ° by using gentle pressure. Start at the tip of the blade, continue to the middle, and finish at the end of the blade. After a while you will notice a small burr at the edge.

4. Then move to the fine grit  of the stone and repeat the process until sufficiently sharp.

5. Please rise the stone and clean off the grinding residues. Please also clean your knife with hot water.