P30 Brazed Tip Carbide Tipped Tool Bit for Steel Processing

P30 Brazed Tip Carbide Tipped Tool Bit for Steel Processing

1. Product Introduction:

With a small piece of tough carbide insert brazed to the tip of a steel shank, carbide tool can be

used for machining most materials including wood, plastic, aluminum, brass and steel etc.

2. Product Picture: China Domestic Standard Type A

3. Product Specification:

--Physical and mechanical properties of main grades:

--Types for brazed tips: available in ISO standard A, B, C, D, E.

-- Tips for using of brazed tool:

1) Structure of brazed cutting tool should have enough rigidity;

2)  The brazed tips should be fixed strongly onto the holder;

3)  Check and ensure good condition of the holder before brazing;

4)  Choose the proper welding material;

5)  Choose the proper welding flux;

6)  Use correct sharpening method;

7)  Mount the brazed cutting tool properly;

8)  Resharpening the brazed cutting tool properly.

4. Packing: Plastic boxes inside with carton outside. Other packaging upon request.

5. Quality Control System:

Everything single piece will be inspected in and after production to make sure it can match your

requests and we guarantee full payment returned if any quality problems.

6. Transportation: Fast and reliable delivery via air, sea and land transportation.

7. About us:

Zhuzhou Kerui Cemented Carbide Co., Ltd is a professional tungsten carbide manufacturer

located in Zhuzhou City, the world renowned cemented carbide base. Have been involved in this

field for over 10 years, we have reach experience in production and research of carbide products. 

We are also an assessed supplier by Alibaba and BV.

Please feel free to contact us for any question or inquiry,

we will initially reply you within 24 hours.

Technical Assistance & Inquiries: (86)-731-22278868  Fax: (86)-731-22609167