2013 Hot Sell E27 6w Remote Control Rgb Dimmable 2.4G Wiifi Led Bulb

Specifications

2013 hot sell e27 6w remote control rgb dimmable 2.4G wiifi led bulb

Specification:

1. LED Type:  Lumenmax 5630
2. LED Life Span: 50,000 hrs;
3. Power Consumption: 0.5-6W
4. Power Factor: ≥0.65
5. Working Voltage: 86~265V
6. Luminous Flux: 28-580LM
7. Color: rgb (can be adjustable)
8. Color Temperature: 3000K-3500K/ 6000K-6500K( can be adjustable )
9. Dimmable: yes
10. Material: Aluminum alloy+PC
11. Cover: milky
12. Base Type: E27/E26(optional)
13. RF:2.4G MHz
14. Remote Distance:more than20m
15. Control led bulb quantity: more than1000pcs
16. Dimension:Φ60mm*120mm
17.  IP Rank:IP40;
18. Certificate: CE, Rohs
19. Operating Temp:-40°C-40°C
20. Warranty: 3 years
21. Remote size:110*52*20mm
22. Remote material:ABS
23. Remote power:AAA*2
24. Remote fabrication processing:multicolor printing &UV varnish

It is a high-performance RGB LED touch remote bulb, adopting the most advanced PWM control technology, owning 640 thousand colors and 20 automatically changing modes to choose.

Also, it has the memory function(that is to say, the previous settings will be resumed when power on again). No extra wiring installation, simple and convenient. Adopting imported LED and the power consumption of LED bulbs is 20% of the traditional incandescent lamp. The life span of LED bulbs is over 10 times longer than the fluorescent lamp. Easy to install, use. safe and stable.

The forged and stamped aluminum lamp body, to the maximum extent, successfully solves the heat sink trouble by air backflow with increasing more fins. Cover of LED bulb is made of PC and nanometer coolant, light transmittance over 85%, light transmits evenly.

With the technology of the 2.4G high frequency wireless remote control, it has the characteristics of low power consumption, long distance transmission, and strong anti-interference ability, high speed telecommunications, etc.

The remote looks fashionable and elegant , with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use .

LED bulbs with lamp base E26/E27/B22 (optional) are widely used in KTV, bar, etc.

Programming (code clearing and code matching) 

Code matching :

For a new kit ( remote& bulb), the remote can work only when it is programmed to the bulb. 

Please follow the below instructions: 

Confirm correct connection between the bulb and the power. 

Switch off the power, then switch on again, and press key 5 once (within 3 seconds)  

the moment you see the light is on. The LED bulb blinks twice slowly when it is done.

Code clearing :

The code can be cleared as needed.  

The kit (remote and bulb) will stay in the original state after code clearing. 

It can work when code rematching is done. 

Please follow the below instructions: 

Also, confirm correct connection between the bulb and the power. 

Switch off the power, then switch on again, and long press key 5(within 3 seconds)  

the moment you see the light is on. The LED bulb blinks nine times swiftly when it is done.

Attention:  

1.The regular product for sale is a kit (remote and bulb). 

The user can re-programme freely as needed. One remote can control countless bulbs, but one bulb can only be control LED by four remotes (Max). 

2.Please check the battery installation and bulb(totally discharge the power), when you programme after switching off and switching on.