24-port L2 Web Managed Gigabit Optical SFP Ethernet Switch GS-1524
Specifications
1.24-port L2 gigabit web managed optical SFP Ethernet Switch2.Advanced Web-based management
3.Auto DoS attack prevention
24-port L2 web managed gigabit optical SFP Ethernet Switch GS-1524
Advantages
Robust System Design
Ethernet Switch GS-1524 is a 24-port L2 Gigabit switch with advanced Web-based management support, that has beenspecifically designed for SMB/Enterprise networks where extra bandwidth and advanced QoS or security features are required. To cope with the diverse requirements of SMB/Enterprise businesses, the GS-1524 Web-managed switch comes with 20 Gigabit copper ports plus 4 dual-personality (RJ-45/SFP) Gigabit ports to provide 48 Gbps of non-blocking connectivity for SB/SMB networks. With the flexible multi-function design, GS-1524 fits any network with very little effort.
Evolution New Managed Power
While many legacy Web-based Smart switches improve manageability, configuration complexity is still an issue; for most SMB/Enterprise, inadequate IT expertise and complicated configuration are the major concerns to overcome. Powered by the next-generation hardware platform with a content-aware engine, Ethernet Switch GS-1524 delivers stress-free networking. In addition, the streamlined and intuitive Web-GUI makes GS-1524 even easier to configure to slash the efforts needed.
Auto DoS Attack Prevention
Security has become increasingly important in SMB/Enterprise networks. Equipped with Auto DoS Attack Prevention, the GS-1524 is capable of protection against ubiquitous DoS attacks. A few mouse clicks are all it takes to initiate the protection, complete the once-complicated ACL setting and reduce operating efforts dramatically. The GS-1524 supports 802.1Q VLAN for traffic isolation, as well as Static MAC forwarding and dynamic ARP to establish a strictly protected network.
Auto VoIP Optimization
Migration to VoIP is the key to differentiate business competitiveness. It usually requires IT expertise to optimize a network for VoIP applications. With emergence of the "Auto VoIP" feature, however, the GS-1524 can identify VoIP packet patterns and grant the highest priority to establish a VoIP-friendly communication automatically. "Auto VoIP" offers IP telephony without configuration headaches; features such as four priority queues and the WRR (Weighted Round Robin) scheduling algorithm are usually deployed on enterprise networks, allowing users to optimize network bandwidth usage and implement QoS (Quality of Service). In terms of bandwidth management and switch interconnections, users can choose from several options and pick the most appropriate with just a mouse click.
Standard Compliance
- IEEE 802.3 10Base-T Ethernet
- IEEE 802.3u 100 Base-Tx Ethernet
- IEEE 802.ab 1000 Base-T Ethernet
- IEEE 802.3z
- IEEE 802.3x Flow control
- IEEE 802.1p Class of service, priority protocols
- IEEE 802.1Q VLAN tagging
- IEEE 802.3ad static port aggregation
Performance
- 48Gbps non-blocking switching fabric
- Switching Forwarding Rate 35.7Mpps
- Wire-speed performance
MAC and Packet Buffer
- 8K MAC entries
- 512KB Packet Buffer
Traffic Management and QoS
- Rate Limiting: Port-based bandwidth control (64kbps, 256 kbps, 1Mbps, 10Mbps, 64Mbps, 100Mbps, 1Gbps)
- Port-based egress traffic shaping
- Broadcast Storm Control
- Congestion control on all ports
- IEEE 802.1p with 4 priority queues per port for different types of traffic
- WRR (Weighted Round Robin)/SPQ scheduling algorithm
- Jumbo frame support (up to 9KB)
Auto VoIP
Auto VoIP module explicitly matches VoIP streams in switches and assign the highest
priority for the following VoIP packets
- SIP - Session Initiation Protocol
- MGCP - Media Gateway Control Protocol
- SCCP - Skinny Client Control Protocol
User Security and Authentication
- Specific MAC forwarding per port: only specified MAC addresses can access the network (Port Security)
- IEEE 802.1Q tag-based and port-based VLAN
- 256 static VLAN, up to 4K dynamic VLAN
- Dynamic ARP
Auto DoS attack prevention
Auto DoS module explicitly matches attack patterns in switches and prevents network outage
Types of DoS Attacks can be prevented
- Land Attacks - These attacks result from sending a specially crafted packet to a machine where the source host IP address is the same as the destination host IP address. The system attempts to reply to itself, resulting in system lockup.
- Blat Attack - These switch results from sending a specially crafted packet to a machine where the source host port is the same as the destination host port. The system attempts to reply to itself, resulting in system lockup.
- SYNFIN Scans - SYNchronization (SYN, ACKnowledgement (ACK) and FINish (FIN) packets are used to initiate, acknowledge and conclude TCP/IP communication sessions. The following scans exploit weakness in the TCP/IP specification and try to illicit a response from a host to identify ports for an attack:
- Scan SYNFIN - SYN and FIN bits are set in the packet
- Xmascan - TCP sequence number is zero and the FIN, URG and PSH bits are set
- NULL scan - TCP sequence number is zero and all control bits are zeros
- SYN with port <1024 - SYN packets with source port less than 1024
- Smurf Attacks - This attack uses Internet Control Message Protocol (ICMP) echo requests packets (pings) to cause network congestion or outrages.
- Ping Flooding - This attack floods the target network with ICMP packets.
- SYN/SYN-ACK Flooding - This attack floods the target network with SYN or SYN/ACK packets.
Network Management
- Web-based management
- Telnet
- SNMP v1, v2, v3
- IP management: static IP or DHCP client
- RMON-Lite
- Port mirroring: supports Source/Destination/Both port mirroring
- Cable Diagnostic
MIB Information
- RFC1213 MIB II
- RFC1398 (Ether-like)
Hardware Specification
- Support of auto-negotiation
- Support of auto MDI/MDI-X,
- Ports: 20/44 1000BASE-T, RJ-45 ports, 4 dual-personality (RJ-45/ SFP slot) GbE ports
Physical Specifications
- 20 100/1000BASE-T copper ports + 4 dual-personality (RJ-45/SFP) Gigabit ports
- Dimensions: 17.2" (W) x 8.5" (D) x 1.75" (H) / 438(W) x 215(D) x 44.45(H)mm
- Weight: 6.6lbs / 3kg
Power Requirements
- Input voltage of AC: 100-240VAC, 50/60Hz
- Max power rating of AC: 43 Watt
Environmental Specifications
- Operating temperature: 32°F ~ 113°F / 0°C ~ 45°C
- Storage temperature: -13°F ~ 158°F / - 25°C ~ 70°C
- Operating humidity: 10% ~ 90%, (non-condensing)
Safety
- UL 60950-1
- CSA 60950-1
- EN 60950-1
- IEC 60950-1
Send Inquiry to This Supplier
You May Also Like
-
ALLEN-BRADLEY PowerFlex 527 7.5kW / 10Hp AC Drive 25C-D017N104NegotiableMOQ: 1 Piece
-
HDMI Switch Box 4x1 VK2-0036NegotiableMOQ: 500 Pieces
-
ZXR10 3906US$ 10 - 5,000MOQ: 1 Piece
-
ZTE 5928E-FI, RS-5928E-FI, RS-59EC-PWR-AC10, RS-59EC-PWR-DC10, 24 GE SFP+ 1 Expansion Card ZTE ZXR10 5928E-FI 5916E 5952E RS-59US$ 100 - 1,000MOQ: 1 Piece
-
L3 Managed 10G Network Switch, 8-Port 10G Base-T RJ45 Ethernet Switch, High-Performance Enterprise Core/Aggregation Layer Switch Focuscom S5720-8HNegotiableMOQ: 1 Unit
-
H3c Ls-5130s-28s-hpwr-ei-ac 24-port Gigabit Managed Layer 2 Enterprise SwitchNegotiableMOQ: 0 Unit
-
Raisecom RC511-4FE-S1 1-Port Fiber to 4-Port Ethernet Converter With 3-Year WarrantyNegotiableMOQ: 100 Units
-
NetEngine 8000 M1A Enterprise-level Router, an Edge Router, Supports Srv6US$ 3010.84MOQ: 1 Unit
-
Buffalo 8-port White Switch Lsw4-tx-8ns/whUS$ 52.31 - 53.85MOQ: 1 Piece
-
H3C LS-5130S-52S-PWR-EI-AC-R Enterprise POE Switch - 48 Gigabit Ethernet + 4×10G SFP Fiber Uplink Ports, Layer 2/3 Managed SwitchNegotiableMOQ: 1 Unit