Home > Products > Dies and accessories > cold pressure welding equipment joining wires dies
cold pressure welding equipment joining wires dies
- 10000 Piece / Pieces per Month
- shanghai
- T/T L/C D/P D/A Credit Card PayPal
Product Details
Place of Origin: | Shanghai, China | Brand Name: | shengzao | Model Number: | SZ |
Shaping Mode: | Compression Mould | Product Material: | Metal | Product: | Other, cold welding machine welding dies |
Product Description
cold pressure welding equipment joining wires dies
1. Cold welder Introduction:
1. Weld copper wire or aluminum wire; or weld copper wire with aluminum wire
2. No need any power, heat, only match corresponding dies.
3. Our machine can weld copper wire from 0.06mm-10.0mm; weld aluminum wire: from 0.06mm-15.0mm.
4. You can choose suitable machine according the wire diameter you need to weld and our machine's welding range.
5. For example, if you want to weld 0.90mm, 1.0mm, 1.20mm, 1.40mm copper wire, you can choose model SZ-3T, SZ-3TR. And also should match four single cavity dies or two double cavity dies.
6. Our machine is compatibility with other supplier’s welders. You can use others’ welding machine with our dies; or use our dies on other supplier’s machine.
7. The tolerance of dies to wire: -1%mm+ 3%mm wire to dies tolerance.
For example: 2.0mm dies can weld the wire diameter from: 1.98mm to 2.06mm wires.
8. Can different metals be welded using cold pressure? Cold welding can be used to join dissimilar materials, such as aluminum to copper.
9. The wire can be welded:
Naked copper wire & aluminum wire, brass wire; enameled copper wire, copper clad aluminum conductor; or weld copper wire & brass wire together with aluminum wire. Plastic wires and other wires should remove surface insulation part, then welding.
Steel wire or stranded wires can’t be welded.
Each dies composed of four modules, six pin, four springs. Four modules are the two "1" modules and two "2" modules, which vary in size, diagonal arrangement. (See picture 1). There is no "1 ", "2"marks in the real dies.
After used the dies for a certain times, or some difficulty in welding the wires, we should clear up the dies as following steps:
1. Take out the modules, pay attention not to lose the spring when open it. Wipe up the surface of each module with a clean dry cloth. Don’t leave any scraps in it, especially no oil in the wireway, or it will slip when connect the wires.
4. Fasten the four modules with the module bracket.
5. Advantage of Our cold welder:
*One year quality guarantee for main welding Machine. Lifetime Maintenance.
*Competitive price.
*Flexible delivery for sample and big order. Usually most not quite big orders can be delivered within 3 working days after order confirmed.
*10 years working experience for production & Research and Development.
* Certificate: CE, CCC, ISO9001-2008; exporting entitlement.
* Agents & distributors & representatives are welcome for all countries.
6. Delivery:
*For small order, we recommend by express like DHL, FedEx, UPS, etc. Large order by air, by sea, by train.
*All welders are in stock, only need time to make welding dies.
7. Exporting Countries we have:
We had exported many countries with good result, like South Korea, India, Pakistan, Sri Lanka, Indonesia, Malaysia, Singapore, Philippines, Vietnam, Thailand, Australia, Iran, UAE, Saudi Arabia, Turkey, Kazakhstan, Uzbekistan, USA, Canada, Russia, Finland, Germany, Serbia, Slovakia, Romania, Egypt, South Africa, Morocco, Tanzania, Angola, Brazil, Mexico, Argentina, Chile, Colombia, etc.
Main benefits of using cold welding:
The weld cycle takes only seconds to complete and creates a permanent bond stronger than the parent material, without using heat, fillers or fluxes.
The welding part is stronger than original part, which can do drawing again.
After welding effect and test(8.0mm wires as follow):
10. Wire Exhibition pictures:
11. Contact Information:
(MISS) Lana Wei
Shanghai Shengzao Mechanical & Electrical Equipment Co., ltd
Tel: +86-021-52697550
M: 0086-13761084602 (wechat, whatsapp number)
Skype:lanalana0562
Website:
126mail name: lanaweishsh
Contact Us
- Shanghai Shengzao Mechanical Electrical Equipment Co., Ltd.
- Contact nameSarah Cao
- Phone86-21-52697550
- AddressFloor 2, No. 30, Lane 2, Suide Road
- custom work-box tool kit rotomolding
- rotomolded Children's toy roto-molding
- rotomolded cooler box custom Logo
- cotom size large cooler box roto-molding
- customrotomolding cool box
- rotomolding trailer or travel trailer custom mould
- rotomolding plastic rotomolded fishing cool box
- Rotomolded water tank rotomolding storage tank
- Rotomolding Dehumidifier With Rotomolded Housing
- rotational Box container rotomolded
- rotomolding lighting custom moulds
- 50QT 70QT rotomolding cooler box for outdoor picnic
- Custom rotomolding rotational mould
- Custom rotomolded outdoor sofa Rotational mold plastic sofa
- Sweeper shell rotomolding
- rotomold Sweeper oil tank supply
- rotomold slide rotomolding
- Hukun rotational molding plastic bucket mold customization
- YOUGE rotomolded food carrier by rotomolding
- Hot Sale Rotomold PE Pontoon rotational moulds
- Chinese factory makes floating pontoons where jet skis dock
- OEM Rotational molds plastic doghouse Doghouse Custom
- rotational oil container rotomolding
- OEM Rotational molds Flower pot moldcustomization rotomoulding
Popular Searches
Recommended Products
- High Abrasion Resistance Double Lips Oil Seal NBR FKM Shaft Seal
- WO040021 Snap Ring Bushing Block 200913 72185226 for Omax KMT
- WaterJet Stainless Steel Enduromax Manifold 306772 307549 For Omax
- Waterjet Cutting Nozzle 300766-30 32 42 For Omax Cutters
- FBL 16/14TU-AH slurry pump manufacturer GAM14147 A05 from China
- AST/OPC solenoid valve coil 300AA00086A for power generation
- globe valve SHV6.4 for power station
- piston pump F3V101S6S1C20 for thermal power plant
- temperature Regulating valve LWH-ZG1/2 for power plant
- Waterjet Parts OMAX 301927 Rebuild Kit
- WK000285 72158494 90KSI PRO-III Use UHP Seal Assembly
- china FengBaiLi 10/8F-AH centrifugal slurry pump sale from mining
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Moulds
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Sarah Cao
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-