Automatic sensor water tank

Specifications

automatic sensor water tank,infrared sensing water tank,offering touch-less ambient, pretty convenient and hygiene.antistrike.

:Features of Automatic sensor water tank: 

1.Revealed automatic sensor + manual low pressure water tank.

2.anti-strike& anti-ignition ABS case, elegant

3.Built-in filter unit, percolate impurity of water effectively to prolong solenoid valve's lifetime.

4.When its low in power or cleaned by hand, the manual device flushing well also.

5.Water storage flushing, strong flushing power, absolutely clean.

6.Stable signal receiving protect water tank from light interference, more sensitive and correct for induce.

7.Electronic control units adopt professional electronic irrigated& sealed glue or ultrasonic plastic seal& moisture-proof technology.

8.Adjustable sensor range, convenient setup, available to satisfy different customers demand.

9.Low pressure water tank, especially fits to place with lower water pressure, small pipe.

10.Revealed design, quite suitable for to renovation project.

Specification:

1.Power: AC 220C/50Hz,DC 6V

2.Electricity consumption:Stand by:c3W;action≤5W (AC),Stand by≤0.5Mw,action≤1.2W(0.3S) (DC)

3.Water inlet diameter:G1/2

4.Water pressure range:0.05-0.8MPa

5.Ambient temperature :1-55

6.Ambient relative humidity:≤93 (+2,-3%)

7.Water temperature:≤45

8.Sensor range: Adjustable within 80cm,based on 297mm×297mm white board

9.Sensor time:Action when induce more than 3s

10.Flushing volume:Moving water tempreture0.1MPa±0.01MPa  2-5L/cycle(built-in regulator).