Contact Platform Support
Help CenterOEM/ODM Smart Home Switch
Related Products
-
OEM/ODM Smart Home Touch Light Wall SwitchUS$ 165 - 300MOQ: 1 Set -
OEM/ODM Wifi Wall Smart Switch/ Touch SwitchUS$ 165 - 300MOQ: 1 Set
-
Newest Remote Wifi Control Light Switch for Home Automation System, Touch Screen, RF WirelessUS$ 165 - 300MOQ: 1 Set
-
Newest Remote Smart Electric Switch for Home Automation System, Touch ScreenUS$ 165 - 300MOQ: 1 Set
-
Smart Switch ,remote Control Switch, Home Automation KNX Smart Switch 4 Key,light Switch GsmUS$ 160 - 300MOQ: 1 Set
OEM/ODM smart light switch Smart four key dermatoglyph touch panel switch
This manual provides you the detailed technical information about the Switch Actuators, not only the installation and programming details, but also the usage explanation in actual application. They can be installed in the distribution boards on 35mm mounting rails according to EN60715.
These switch actuators can be used to control the switch loads, such as:
- intelligent switch
- Lighting
- Heating control
- Signal devices
The switch actuators are the modular installation devices, with 8 and 12 outputs for selection, using KNX connection terminals to connect to the system. The switch actuators need to connect an extra 230V AC power supply and provide to 4 outputs. It is able to use the Engineering Tool Software ETS (ETS2 v1.3 or later) with a VD2/VD3 file to allocate the physical address and set the parameters.
If the 230V AC power supply is not connected, all LEDs are flashing for indicating output state on the device.
It is able to switch from 4 to 8 independent electrical AC loads or three-phase loads and 4 electrical AC loads with the same phase of the 230V AC power supply by the switch actuators with maximum output of 6A per output and manual switch, as well as visible switching status via LED indication.
There are same following programming functions for each output:
w time function: on/off delay
w staircase function with the warning and adjustable staircase lighting time
w scene, preset control: 8bit/1bit
w logic operation: AND, OR, XOR, gate function
w status response
w forced operation and safe function
w threshold function setup
w control of electro thermal valve function
w manual operation switch
w indication of switch status (contact position)
Electrical source: work 21 ~ 30 V dc bus voltage electric
The working current: Max 12 ma
Power consumption: Max250mA
Interface: standard EIB interface
Temperature range: - 10 ℃ to 50 ℃
The key way: a capacitive touch sensor
Installation method: standard 86 bottom box installation
Shipping way:
Send Inquiry to This Supplier
You May Also Like
-
Wall SwitchNegotiableMOQ: 2000 Pieces
-
Electric Wall Switches Sockets and Boxes Stocklots AvailableUS$ 0.3 - 0.4MOQ: 25000 Units
-
IP65 Waterproof 110 Volt Electrical Plugs and Socket English StyleUS$ 0.1 - 100MOQ: 100 Units
-
White Plastic Wall Mounting Box For AU/US Standard Home Light SwitchUS$ 1.5 - 2.5MOQ: 1000 Pieces
-
Custom High Quality Plastic SwitchUS$ 0.01 - 2MOQ: 1000 Pieces
-
S11-3774110 Hot Sale Headlight Switch for CheryUS$ 4.85 - 5.8MOQ: 100 Pieces
-
Voice Delay SwitchUS$ 1 - 5MOQ: 5 Pieces
-
WALL PLATE VGA Female & USB Female & 3.5Stereo Famale & RCA Female Face Plate and Wall SocketUS$ 5 - 6MOQ: 1000 Pieces
-
Wall Switch Socket Antenna Part Anchor TypeUS$ 0.1 - 10MOQ: 1 Piece
-
New Design 2 Pin and 3 Pin Socket With Wall Switch Manufactured in ChinaUS$ 17 - 18MOQ: 1000 Pieces
