P080S 8 inch industrial mini touch screen panel embedded computer for industrial monitor all in one industrial embedded PC touch

Specifications

industrial embedded PC touch
1. Dimension :230X180X51mm
2. Power :12/24VDC
3. Chip set: Intel NM10
4 .CPU: Intel Atom N2800

P080S 8 inch industrial mini touch screen panel embedded computer for industrial monitor all in one industrial embedded PC touch

 

Overview of industrial all in one PC

 

QY-P080-S is a touch-screen tablet computer solution which is designed for the the man-machine interface application,

it using the latest atom N2600 dual-core 1.6 Hz low power processor,with 2 gb of DDR3 memory, and equipped a 8 " and

800 x600 resolution LCD high temperature resistive touch screen .The whole machine apply 12 v dc power supply, which

can effective control internal heat of the computer ;This industrial computor can provide more diversified data storage device,

at the same time, support DOM/SSD and SATA 2.5 "notebook hard disk; integrated rich I/O interface, a RS232 serial port,

a RS232 / serial port 485, two 10 ~ 1000 m ethernet front-end portsand 2 usb ports.

 

QY-P080-S apply panel embedded installation, only need four tighten clamp to complete installation, it is very convenient;

The front panel operator meet the requirement of  NEMA/IP65 waterproof and dustproof,which can effective control the splash

water and steam into the host sleep,which will influence equipment normal work;The equipment can adopt fanless design,

which can limited dust inter equipment, and ensure the machine more stable operation through the faster cooling of external

surface, make sure it can adapt to a harder environment;This P080S is very suitable for applied in factory automation, machinery

manufacturing, numerical control equipment, textile equipment, intelligent power, food traceability and other PC monitoring and control.

 

QY-P080-S can compatible with Windows 2000, Windows XP, Windows VISTA, Windows 7, Linux and other major operating
systems and embedded system.Moreover,it can run some procedures and software which is designed by customer and based

on the above operiating system.It can be formed a powerful man-machine interface after install a industrial automation configuration software.

 

                                   

Features of industrial all in one PC

 

• Ultra-thin design, control the overall thickness of 50 mm
• 8 "true color LCD display, 800 x600 resolution, the service life of the backlight for up to 50000 hours
• Built-in atom N2600 dual-core 1.6 Hz low power processor, Intel ® NM10 chipset, support 224 MB of Shared memory
• Equipped with rich industrial control interface, commonly used maximum six RS232 serial port, 2 to 10 ~ 1000 m ethernet front-end ports and 4 USB ports.
• Touch screen with five line high temperature resistance type . Click number up to 35 million times
• 12/24 v dc power input, meet the industrial field power supply
• Support with built-in wireless network card and bluetooth device
• Large area of aluminum fin active cooling design, ensure that the tablet can under work in bad industrial enviroment

 

Specification of industrial all in one PC

 

System parameters	CPU	Atom N2600 dual-core 1.6Hz low-power processor (3W), 533MHz front side bus
	Chipset	Intel® NM10
	RAM	2GB DDR3 1066MHz SDRAM
	Disk	SATA 2.5"SSD,HDD and DOM
	Display	Intel GMA950 224MB ( Shared memory, dual display support )
I / O Interface	Network Port	2*RJ-45
	Audio	RTL ALC883 ,
	USB	2*USB2.0
	Com Port	2* DB-9  ,  1 * RS-232 ,  1 * RS232/485
LED Screen	Display	8”VGA TFT LED
	Resolution	800x600
	Brightness	350cd/m2
	Contract Ratio	600:1
	Max Colors	16M
	Display Area	164.5X124.5mm
	Response Time	8ms
	Pixel Distance	0.297x0.297
	View Angle	(H)160/(V)160
Touch Screen	Type	5 line resistant
	Resolution	4096X4096
	Life time	250g ,35 million times
	Response Time	<5ms
	Surface Hardness	3H
	Light Transmittance	>81%
	Stroke Life	250g, 5 million times
	High Temperature Test	85℃/1000hrs
	Constant Temperature And Humidity test	85℃/90%RH/1000hrs
Agencies Parameters	Panel Box	Panel molding process using aluminum-magnesium alloy, magnesium alloy shell with overall heat the entire surface machining. Panel molding process using aluminum-magnesium alloy, magnesium alloy shell with overall heat the entire surface machining.
	Installation	Panel embedded, with bracket VESA mounting
	Power	12/24V
	Color	Black
	Weight	3KG
	Panel Dimension	230X180X51mm
	Carton Dimension	213X167X46mm
	Hole Size	215X169mm
Environment Parameters	Working Temperature	0~60℃
	Storage Temperature	-20~70℃
	Humidity	0~95%@40℃
	Vibration	50 ~ 500Hz , 1.5G.0.15mm
	Impact	10G(11ms)

 

 

 

Detail parts of industrial all in one PC

 

  Outlook

 

 

 

 

 

Ports of industrial all in one PC showed from different angle

 

Ports of industrial all in one PC showed from different angle

 

 

Interface definition of industrial all in one PC

 

 

 

 

Delivery

P080S 8 inch industrial mini touch screen panel embedded computer for industrial monitor all in one industrial embedded PC touch

 Delivery :DHL / UPS / FedEx / EMS 

 

 

Certification

 

 

 

 

 

Our service