Contact Platform Support
Help CenterEco-Friendly Wood Chips Igniter for Wood Pellet Boilers
Related Products
-
230V 80ohm Furnace Igniter for Biomass IgnitionUS$ 8 - 18MOQ: 100 Sets -
220V 170W High Temperature Ceramic Igniters for Biomass BurnerNegotiableMOQ: 100 Pieces
-
230V 80ohm Ceramic Igniter for Pellet StoveNegotiableMOQ: 100 Sets
-
Hot Temperature Biomass Boiler Burner IgniterUS$ 8 - 18MOQ: 100 Sets
-
China Make Good Quality Cheap Price Pellet Stove Igniter SupplierNegotiableMOQ: 10 Pieces
Specifications
1.Igniter for wood pellet boilers2. High temp. and power
3.Fast heating up
4.Long life
5.Meet Rohs
Xiamen Green Way is your best choice for high level quality and best price ceramic igniter for
biomass burnerswith the advantages of long service time, fast heating rate, energy-efficient
and eco-friendly.
Characteristic
1.High temperature-resistance ceramic heating element which can reach a permanent working
temperature above 750°C
2.Energy saving, super fast heating-up
3.Air can through and around inside and outside of the heater.
Heat can be transfered from both inside and ouside of the heating element.
4.Electrically oxidation and corrosion-resistant
5.High load-bearing capacity(thermal shock resistance, cycles)
5.Customization the igniters according to customers’ specific requirement.
Application
One special application area for Green Way’s high temperature ceramic igniters is in heating systems that
use solid fuels such as wood pellets as energy source. The challenge here is to ignite the biomass in a very
short time while retaining very low emission values. This can be perfectly achieved by Green Way’s hot surface
ceramic igniters.
Ceramic hot surface igniters for pellet boilers need only approx. 1/10 of the energy of that needed
by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200 Watt. Depending
on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is
extremely short. This also means minimal emissions!
Igniting wood chips, firewood, coal bricks or other biomass (such as corn, etc.) is possible.
Mass customization is available.
1 |
Part No. |
G90105-5 |
2 |
Usage |
wood pellet boilers igniter |
3 |
Working Voltage |
230VAC |
4 |
Power |
150 -200(W) |
5 |
Dimension of product |
Standard Dimension |
6 |
Cable |
500 mm long silicone cable |
7 |
Advantages |
(1)Ready to fit solution: High temperature heating element in temperature-resistant ceramic socket
(2)Air can flow through and around inside and outside of heater
(3)Element temperature: over 1000 °C in permanent and alternating operation, for a short time up to 1200 °C
(4)Lifetime up to 100,000 heating cycles, depending on operating conditions
(5)Oxidation and corrosion-resistant
(6)Ignition through air heating: Due to extremely high heater temperature and ideal geometric conditions, air is heated in a very short time to very high temperatures – the ideal ignition blower!
(7)Igniting wood chips, firewood, coal bricks or other biomass (corn, etc.) is possible. |
Send Inquiry to This Supplier
You May Also Like
-
Ceramic InsulatorNegotiableMOQ: 2000 Pieces
-
Steatite Ceramic PipeUS$ 0.05 - 10MOQ: 1000 Pieces
-
Piezoelectric Ceramics Disc YL090E-20US$ 0.01 - 0.1MOQ: 5000 Pieces
-
Steatite Ceramics With High QualityUS$ 1.70 - 2.00MOQ: 2000 Pieces
-
Cordierite Mullite Ceramic Insulators for Electric HeaterUS$ 0.99 - 9.99MOQ: 10 Pieces
-
Alumina Ceramic Snail Wire Guides(ceramic Pigtail Coil )NegotiableMOQ: 100 Pieces
-
Aluminum Oxide Industrial Ceramics, Insulation, Shaped Ceramic Heads, Wear-resistant Ceramics, Ceramic Accessories, Electronic CeramicsNegotiableMOQ: 1000 Pieces
-
Piezoelectric Pzt Element Ultrasonic Cleaning Transducer Material Lead Zirconate Titanate Ceramic Ring 25x10x3mmUS$ 3.5 - 4MOQ: 50 Pieces
-
Boron Nitride CeramicUS$ 20 - 200MOQ: 1 Piece
-
Pulp Mold Products Packaging InsertNegotiableMOQ: 1 Piece
