Contact Platform Support
Help Center230V Hottest Sale Pellet Igniter for Wood Pellet Burners
Related Products
-
230V 150W Ceramic Igniter for Pellet StoveNegotiableMOQ: 100 Sets -
230V150W Ceramic Igniter for Pellet StoveNegotiableMOQ: 100 Sets
-
230V High Quality Ceramic Igniter for Wood Pellet BoilerUS$ 8 - 15MOQ: 100 Sets
-
Hot Surface Stove Igniter for Wood PelletsNegotiableMOQ: 100 Sets
-
230V Hot Sale Biomass Pellet Igniter Wholesale With Good PriceNegotiableMOQ: 10 Pieces
Specifications
1.Pellet gniter for wood pellets burners2.more than 800deg.C
3.Heating up in 20s
4.Long life
5.Meet Rohs
HIGHLY DURABLE AND ENERGY-EFFICIENT XIAMEN GREEN WAY’S IGNITER
----ceramic hot surface igniters for the sake of environment.
Xiamen Green Way is your best choice for high level quality and best price ceramic igniter for biomass
burnerswith the advantages of long service time, fast heating rate, energy-efficient and eco-friendly.
Characteristic
1.High temperature-resistance ceramic heating element which can reach a permanent working temperature
above 750°C
2.Energy saving, super fast heating-up
3.Air can through and around inside and outside of the heater.
Heat can be transfered from both inside and ouside of the heating element.
4.Electrically oxidation and corrosion-resistant
5.High load-bearing capacity(thermal shock resistance, cycles)
5.Customization the igniters according to customers’ specific requirement.
Application
One special application area for Green Way’s high temperature ceramic igniters is in heating systems that
use solid fuels such as wood pellets as energy source. The challenge here is to ignite the biomass in a very
short time while retaining very low emission values. This can be perfectly achieved by Green Way’s hot surface
ceramic igniters.
Ceramic hot surface igniters for pellet boilers need only approx. 1/10 of the energy of that needed by
hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200 Watt. Depending on
the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely
short. This also means minimal emissions!
Igniting wood chips, firewood, coal bricks or other biomass (such as corn, etc.) is possible.
1 |
Part No. |
G78105-2 |
2 |
Usage |
ceramic igniter for Pellet burner |
3 |
Working Voltage |
230VAC |
4 |
Power |
150--230(W) |
5 |
Dimension |
L=94mm; D=17.5mm (standard igniter) |
6 |
Silicon Cable |
500mm long |
7 |
Advantages |
(1)Ready assembled, easy-to-install systems.
(2)Ready to fit solution: High temperature heating element in temperature-resistant ceramic socket
(3)Space-saving, noiseless and impervious to overheating.
(4)Element temperature: over 1000 °C in permanent and alternating operation, for a short time up to 1200 °C
(5)Lifetime up to 100,000 heating cycles, depending on operating conditions
(6)Minimal energy consumption
(7)Ignition through air heating: Due to extremely high heater temperature and ideal geometric conditions, air is heated in a very short time to very high temperatures – the ideal ignition blower!
(8)Igniting wood chips, firewood, coal bricks or other biomass (corn, etc.) is possible. |
~~~Kinds of Inspection before Goods Delivery~~~
Here in Greenway, all heater should do 100% Inspections before delivery.Such as Apprearance
Test,Straightness Test,Dimension Test,Power-On Test,Dielectric Test and Resistance Distinguish.
~~~Simple Making Process~~~
Send Inquiry to This Supplier
You May Also Like
-
Ceramic InsulatorNegotiableMOQ: 2000 Pieces
-
Steatite Ceramic PipeUS$ 0.05 - 10MOQ: 1000 Pieces
-
Piezoelectric Ceramics Disc YL090E-20US$ 0.01 - 0.1MOQ: 5000 Pieces
-
Steatite Ceramics With High QualityUS$ 1.70 - 2.00MOQ: 2000 Pieces
-
Cordierite Mullite Ceramic Insulators for Electric HeaterUS$ 0.99 - 9.99MOQ: 10 Pieces
-
Alumina Ceramic Snail Wire Guides(ceramic Pigtail Coil )NegotiableMOQ: 100 Pieces
-
Aluminum Oxide Industrial Ceramics, Insulation, Shaped Ceramic Heads, Wear-resistant Ceramics, Ceramic Accessories, Electronic CeramicsNegotiableMOQ: 1000 Pieces
-
Piezoelectric Pzt Element Ultrasonic Cleaning Transducer Material Lead Zirconate Titanate Ceramic Ring 25x10x3mmUS$ 3.5 - 4MOQ: 50 Pieces
-
Boron Nitride CeramicUS$ 20 - 200MOQ: 1 Piece
-
Pulp Mold Products Packaging InsertNegotiableMOQ: 1 Piece
