5mm Tempered glass factory

Specifications

5mm Tempered glass density:2.5g/cm3 Transmittance;91% Reflectivity:Less than 2%.Mohs hardness 7-8

    Tempered glass( 5mm Tempered glass ) is a kind of pre-stressed glass, to improve the strength of the glass, typically using a chemical treatment or physical hardening hardening treatment method, form a pressure in the glass surface, the glass surface exposed to external stress when the first offset, thereby improving the carrier ability to enhance glass itself wind pressure resistance, cold and heat resistance, impact resistance and so on.Features Benefits:The first is several times greater strength than ordinary glass, bending resistanceThe second is safe to use, increase its carrying capacity improved friable nature, even if the glass also showed no acute damage to small fragments of the human body injury greatly reduced. Tempered glass resistant to thermal shock properties than ordinary glass 3 to 5 times higher than the increase, and can withstand 250 degrees above the temperature changes, to prevent heat burst have a significant effect. Is a safety glass.
    Security: When the glass is external damage, Debris  will become very small obtuse angle grains and difficult to cause harm to humans.
   High strength: the impact strength tempered glass of the same thickness of ordinary glass 3 to 5 times more than the ordinary glass ,bending strength 3-5 times.
    Thermal stability: Tempered glass has good thermal stability, can withstand the temperature is more than 3 times that of ordinary glass, can withstand 200 °C temperature changes.
     Uses: Widely used in: furniture, furniture, electronic appliances, decorative safety glass .

5mm Tempered glass factory

5mm Tempered glass factory

5mm Tempered glass factory

5mm Tempered glass factory

5mm Tempered glass factory