Automatic hot air welding machine with stability temperature

Automatic hot air welding machine with stability temperature

I.Field of application

LC-15 smart type:Suitable for advertising industry,inkjet fabric,light box cloth,Knife cloth,mesh cloth PVC,PE hot melt plastic membranes welding process.

II.Main technical details

Rated voltage: AC110-240V Frequency: 50-60Hz

Power : 1000-3000W Temperature scope: 0-500°C

Speed scope: 1-15m/min Sepcification: 41*25*20cm

Weight: 15-20Kg Splicing width: 2-5cm

III.Characterics

No glue splicing,temperature abjustable speed,with a feedback temperature sensor,real-time monitoring and control temperature (usually the market adjusted voltage,adjust the wind speed,temperature is not constant).No matter how long screen,welding screen effect will not change.

IV.Operation procedures

1.First of all,lighten up the spraying cloth,target the sew.(2-5cm),and fix the cloth on the ground with glue or tape(picture1)

2.Insert the power(picture),turn the handle to the left,till the spout is straight-line with the wheel.The turn the black button to the right,adjust the speed,usually put it on 4(picture 2).After adjust the speed,turn the handle to the right till the spout leave the ground.Then it stops.

3.Adjust the temperature.Turn on the temperature button(turn the golden button to the right,it make the voice"Ka".Then press the temperature up and down button(picture 3),adjust the temperature according to the thickness and durable of the cloth,usually put it between300°C and 350°C.Or you can put some materials in the spout,if the materials melt immediately and shouldn't scorch.It is the proper temperature.

4.After adjust the temperature and speed,put the edge of the right-wheel in a level with the edge of sew.When the actual temperture reach to your set temperature,turn the handle to the left till the spout insert into the sew totally.(picture 4)The machine beginstowalk.Splicing begins.

5.During splicing,if the spout melt the spraying cloth.First you should turn black button to the right a little,or you can turn down the temperature.(choose one from the tow ways) in that way,it won't melt the cloth.But you shouldn't turn the button in very urgent speed,or it will make the machine can't weld or damage the cloth.

6.Before using,please find a proper temperature and speed.If slow,it will damage the cloth;if fast,it may stick not sso fasten,so it is important to adjust the temperature and speed.

7.On the completion of splicing,turn the handle to the right,till the spout leave the spraying cloth totally.(picture 5).At this time,you can turn off the temperature button.But you couldn't turn off the power cord and the power button,in case the heat damage the heat gun,and make the machine couldn't work.You must wait till its actural temperature reach to the lowest.

8.Don't use the machine in wet weather.The working place must be dry and flat.Pay attention to the fire,the machine ,you should be responsible for the result yourself.

9.The warranty period is six months,heating elements are not in the warranty scope due to it being a repid-wear article,and we are only responsible for the supply of fitting ,but the cost is subject to the client.

10.Fitting equipped along with the machine include a source line of 10m,a piece of alternate heating element, a instrution book and a CD.

Why Purchase From Us:

1,Shipping information:

We will send products by DHL/FEDEX/UPS/EMS/TNT

1) All the goods delivery by express from Guangzhou. And we will declare the low value on the shipping invoice to reduce your customs tax.

2) There are no shipments on weekend and public holidays.

3) Delivery time to your country.

2,Payment Information:

We will delivery goods within 1-2 working days after confirm receive your payment.

3, Payment terms:

We usually accept T/T, Western Union, Money Gram, L/C.

4, Packing Terms:

All items are Brand New.

We will use appropriate materials for a reasonable, secure packing of your goods. If goods are damaged during the transport, please inform our service department within 3 days after goods are received.

5, Print Head Return Requirements:

All our printheads are high-precision commodity and brand new, any improper operation or substandard supporting products will damage the print heads. So after receiving the goods, please first confirm print head model and specifications , any problem, please contact with our sales staff as soon as possible. Any problem after the print heads are installed and used will be non-refundable.

6,. All of our product is direct from original manufacturer, who also supplies the brand name to domestic market but with much higher price. We offer this special purchase and pass this saving direct to our customer.

We understand what you need in your business. We can give you professional advices, suggestions and ways to further reduce your production cost in the long run. Please feel free to contact us if you need more information.

7. The feedback from clients

8. Banner welding machine

9. More product:

YiTe (Guangzhou) Trade Co., Ltd use advanced ink manufacture and formulation technologies imported from the USA. Our customers are from India, Malaysia, the Philippines,Indonesia, South Korean, theUK, Brazil, and other countries and regions.

Trust us, we will supply the high quality product and the best sale service to you.

Thank you for your reading!