Low price!Practical Manual Grommet Punching Machine Big eyelet

Low price!Practical Manual Grommet Punching Machine Big eyelet

Creative revolution from the traditional grommet fixing method.

Needs just one male grommet for fixing,no female one any more.

With wheels and movable manually

-Fast working speed,one skilled worker can make 30 eyelets per minutes(1800 eyelets per hour).

-Surely reduce the cost by using only one gromme.

-Commonality and feasibility on the consumables.May use not only specific grommets but also the common 4# and 5# grommets with the suitable pressing die.

-Hand-propelled movable design,portable for convenient use.

-High strength of eyelets,not easy to rust.

DK-98:  n.w.: 7.80 kg/set, g.w.: 9.50 kg/set, 4 sets/ctn, ctn size: 46*33.8*27 cm

Hand Press Machine attching Snaps, Using Snap Press Machine

--Step 1: Using hex keys, loosen upper and lower screws (they hold die pieces in place).

 Place cap die in the bottom hole of snap press. The cap die is the solid metal one with a curved top.   The hex key can be used to secure the cap die in place, however this isn really necessary as it stays in place on its own.

--Step 2: Decide which side of the snap you want to apply first (socket or stud), then insert the appropriate die piece in the snap press. We have decided to use a socket die. When die is in place, tighten the screw with the smallest hex key to hold it in place

--Step 3: Find a socket piece and snap it into the socket die. It will click in place

--Step 4: Take the cap piece and push the cap prong into the fabric. It doesn need to push all the way through the fabric, just hold it firmly in place.

--Step 5: Place the cap into the cap die (it should fit snugly into the die dimple). Keep hold of the fabric to prevent it moving.

...