Specifications

4 pin18v AC power adapter for Acer AL2032W LCD monitor
1.Input:AC 110-240V
2.output:DC 18v 4.16-5a
tection: OCP ,OVP SC

4 pin18v AC power adapter for Acer AL2032W LCD monitor

 

 1.Features:

 

Input voltage:	110-240V(AC)
Input power:	100W
Output voltage:	24V(DC)
Output voltage accuracy:	±5%(no load)
Dc connecter:	customized
Input Rated Current:	1.0Amp
Input Min. Current:	0.1A
Output DC wire:	1.2m
Ripple noise:	100mv
Protection:	OCP,OSP,OVP

 

 

 

2.Technical specification:

 

Input voltage Rated Voltage: 100~240Vac

Variation Range: 80V~280Vac Input Frequency Rated Frequency: 50/60HZ Variation Frequency: 47~63Hz

Input current 0.5Amax. at any input voltage and rated, DC output rated load.

Inrush Current 30Amax. @ 264Vac input Efficiency: 80% min at 100Vac input and output rated .Load.

Turn on delay time: 80% min at 100Vac input and output rated .Load. 3S max. @ 100 Vac to 240 Vac input & Full load Rise time 20mS max. @ Rated load Hold up time: 5mS min. @ Full load &230Vac/50Hz input turn off at worst case

Short circuit protection: The power supply will be auto recovered when short circuit faults remove. Over current Protection: The power supply will be auto recovered when over current faults remove Over Voltage Protection: The power supply will auto recovered when faults remove 120%~150%.

Environmental requirement: Operating Temperature: 0~40°C ,full load , normal operation. Storage Temperature: -20~80°C with package Relative Humidity: 10%(0°C) ~90%(40°C) RH

 

 

3.Suggested application:

Digital Camera, lcd power supply, tv power supply, Notebook/laptop adapter ,ADSL AP, Wireless Lan Station, LCD Monitor,cctv camera, Hard Disk, Communication Terminals, Any Portable Device or Machine ,etc.

 

4.Warranty:

 

•  1)Heat-resistance: The switch power supply shall be stored at a temperature of 55+/-2 °C for 16 hours. Then No distortion and (Storage) it shall be subjected to standard astrospheres conditions for 2 hours,

•   2)Heat resistance: The switch power supply  shall be placed at a temperature of 25+/-2 °C and operating at No abnormity (Operation) full load for 4 hours. Measurement shall be made.

• (3)Cold-resistance: The  switch power supply  shall be stored at a temperature of -20+/-2 °C for 16 hours. No distortion and
• (Storage) Then it shall be subjected to standard astrospheres conditions for 2 hour, No function errorafter which measurement shall be made.

• 4)Cold-resistance: The SMPS shall be placed at a temperature of 0+/-2 °C and operating at No abnormity (Operation) rate75% full load for 4 hours. Measurement shall be made.

• 5)Body surface temp: at a entironment temperature of 23+/-2 °C , 100VAC/2.0A load ≤65°CFor 2 hours, measure central section of sueface  (thermoelectric couple method)

• 6) M.T.B.F: 50K Hours At 25°C With 80%Loading No abnormity
• 7) Life : Average Life Expectancy Or 3 Years