China manufacturing 12v led bulb e27 2w 4w 6w 8w energy saving cheap PC plastic led bulb lighting for home and office

China manufacturing 12v led bulb e27 2w 4w 6w 8w energy saving cheap PC plastic led bulb lighting for home and office

Specification

HL-ST64 is a LED bulb filament ,it has a classic appearance.

With high brightness features and long life , widely used in shopping malls Hotel, decorative lighting, etc.

Products Features
*Long life, higher than 20,000 hours.

*High energy efficiency, than ordinary light bulbs saving more than 70%.

*Mercury and other harmful substances, environmental protection, no ultraviolet radiation, no flicker.

Technical Parameters

Products show

 Application

 Installation Instructions

1,PLease check the input voltage of AC110 ~ 220V, 50 / 60Hz before installation,and Make sure the power is turned off.

2,LED filament bulb is E27 spiral lamp.

3,Please Install the product within the E27 lamp holder or lamp housing containing E27 lamp holder, in accordance with the direction of the thread can be tightened.

4,Turn on the power switch, the light would e lighting after power ups.

Please pay attention to 

1,Please read these instructions carefully before installation.

2. The supporting wall or ceiling fixtures should have sufficient strength

.
3. Always ensure fixture ground wire grounded to prevent electric shock or damage to the case when the lamp fixture from power leakage.

4. The lighting installation, wiring must be carried out in case of power outages.

5. After lighting installation wiring is complete, then power to guard against electric shock test.

6. Do not attempt to open the lamp to prevent damage to the light source and the lamp fixture tightness column resulting loss is not covered under the warranty.

7. This product is faulty, please contact the Company during use, we will be professional treatment.

8. This product outer packaging of glass products, carrying must be handled with care to avoid a collision resulting in damage.

Certificate

Our company show 

Contact information