Home > Products > Optical Fiber Multiplexer > BNC to IP Converter
BNC to IP Converter
- 500 Unit / Units per Month
- BNC to IP Converter will be shipped to Shanghai ningbo or any port in China
- T/T L/C D/P D/A Credit Card PayPal
Product Details
Place of Origin: | Shanghai, China | Brand Name: | Baudcom - BNC to IP Converter | Model Number: | BD-OP-16E1 |
Product Description
Product: BNC to IP Converter
Overview:
The BNC to IP Converter uses reverse multiplexing technology to transmit 10/100BaseT data with bonding multi E1 channels, thus realizing conversion between 1-16 E1 channels and Ethernet interface. It can transmit signals point-to-point from E1 channel to RJ45 interface to realize connection between E1 channel and Ethernet. Being different from general long-distance bridge, this converter supports flexible configuration of 1 to 16 channels E1 and can detect the number of E1 channel and choose available channel. In the meantime, certain difference of transmitting delay is allowed among E1 channels. When used in 10/100Mbps half/full duplex mode, this equipment can be connected with Ethernet switch or hub (integrated circuit machine) to expand transmitting distance and application scope of Ethernet by making full use of large number of E1 channels in current telecommunication network. It is an excellent solution for connecting Ethernet broadband. This product can be applied in many fields such as connection of LAN and end offices, video ordering (VOD), remote monitor and E1 interface of switches.
Features:
- BNC to IP Converter Realizes transparent transmission of Ethernet data in 1 to 16 E1 channels.
- Ethernet supports 10M/100M, full/half duplex auto-negociation, supports VLAN.
- Ethernet port supports AUTO-MDIX (cross over and straight through auto-adapt).
- Setting CRC alarm limitation to auto isolate lines with low transmitting quality (being cut single-directionally); when error code rate of one direction in 2M branch exceeds the limitation, this direction is cut and the other direction will not be affected, namely the two transmitting directions of Ethernet can be unsymmetrical.
- Allow 16 E1 channels up to 10ms transmission delay. When the delay exceeds allowed limit range, it can stop transmitting data automatically.
- Has 2 loop back functions: E1 local loop, E1 remote loop.
- Supports Dynamic Ethernet MAC address (4096) with local address filter function.
- E1 interface compatible with ITU-T G.703, G.704, and G.823. not supporting signal timeslot.
- E1 interface has internal clock recover circuit and HDB3 code/decode circuit.
- Supports E1 channel hot plug, and auto detect effective E1 channels data transmission will not be cut.
- Supports 1 to 16 E1 channels customized configuration, auto detect the number of E1 channels and select the available E1 when resetting. Supports resetting remote system from local system.
- Support SNMP network management
- Having Ethernet monitor auto reset function.
Parameter and specifications
E1 interface
Standard: E1 interface compatible with G.703 standard.
Rate: 2.048Mbit/s50ppm
16E1 to Optical Eth Converter Coding: HDB3
Impedance: 75ohm ( unbalance) or 120ohm (balance)
Connector: BNC (75ohm) or RJ45 (120ohm)
Jitter Performance: According to G.742 and G.823
10/100Base-T
Rate: 10M/100M, full/half duplex auto-adapt.
Protocol: Support IEEE 802.3, IEEE 802.1Q (VLAN)
MAC address table: 4096 MAC addresses.
Ethernet buffer: 64Mbits SDRAM
Physical interface: RJ45, support AUTO-MDIX (cross over and straight through auto-adapt)16E1 to Optical Eth Converter Dimension
19inch rackmount type:433 mm(L)138mm(W) 44 mm(H)Operating environment
Voltage: DC-48V , input range: DC-36V~DC-72V
Power Consumption: <=5 Watts
Working temperature: 0C~50C
Storage temperature: -40C~+70C
16E1 to Optical Eth Converter Humidity: 95%
No causticity and solvent, dust free, and no strong magnetic interference.
BNC to IP Converter picture:
BNC to IP Converter Application Diagram:
16E1 to Optical Eth Converter Application Diagram
Contact Us
- Shanghai Baudcom Communication Device Co., Ltd.
- Contact namerobert luo
- Phone86-21-37709251
- Address519A, Building A, 389 Lianming Rd.
Ethernet Switch | fiber media converter | GEPON Access System | Hot Selling |
Interface Converter | New Products | Optical Component | Optical Fiber Multiplexer |
SDH Multiplexer System | Wholesale Product |
- AIR-DNA-E-3Y Wireless License DNA Software License
- ACI-AD-XF Software License
- NXOS-AD-XF Software License
- NXOS-AD-M4 Software License
- bliiot RS485/232 industrial gateway use for Smart Agriculture Monitor
- bliiot RS485/232 cost-effective industrial gateway BL100
- 4G industrial edge routers are used for geological hazard monitoring
- FXA3020 External Antenna Type Wireless LAN Access Point (Master/Slave Station)
- FXA3000 IEEE802.11n/a/b/g Wireless LAN (Access point / Station)
- FXA3200 Simultaneous connection type Wireless LAN Access Point (Master Station)
- FXE3000-WP IP65 protection class IEEE802.11n/a/b/g Wireless LAN (Access point / Station)
- BLIIOT M420T 16-channel data output 1RS485 extended dry and wet contact cloud platform acquisition module
- BLIIOT M410T 16CH Digital Input Optocoupler Isolated Energy Meter PLC Data Collection Remote Module
- BLIIOT M340T 8RTD Intelligent Acquisition Remote Ethernet I/O Rail Customized IoT Acquisition Module
- BLIIOT M330T 8AIN analog input industrial I/O acquisition device 1RS485 serial port expansion module
- BLIIOT M320T 8DO software is equipped with a remote module for multi-point decentralized collection of industrial IoT environmental protection
- BLIIOT M310T 8DIN automatic control forestry agriculture power grid remote data acquisition module
- BLIIOT M240T Ethernet port 4RTD pt100/pt1000 data remote acquisition
- BLIIOT M230T Solar Meter to Cloud Platform Remote Data and Control Module
- BLIIOT M220T Intelligent Agricultural Aquaculture Library Storage
- BLIIOT M210T 4DIN + 1RJ45 + 1RS485 ANTI-SHAKE TO CLOUD PLATFORM PC TEMPERATURE AND HUMIDITY DATA
- BLIIOT M200T 2AO+1RJ45+1RS485 Industrial Automation Smart Grid
- BLIIOT M340E 8RTD+2RJ45+1RS485 DIN Rail Customized IoT Acquisition Module
- BLIIOT M330E 8AIN analog input 2RJ45 dual network port 1RS485 serial port expansion module
Popular Searches
Recommended Products
- 1240/1310nm Single Mode WDM
- Wireless telephone DECT cordless telephone
- FortiGate FortiWiFi 80F Series FG-80F/FG-81F
- 2x2 Magnet Fiber Optical Switch 1550nm
- 1550nm 1x4 Magnet Fiber Optical Switch SM
- 1520-1580nm 1x2 Magnet Fiber Optical Switch
- Magneto optical switch 1XN
- Magneto optical switch 1X1
- Magneto optical switch 1X1
- Magneto optical switch 1X4
- Magneto optical switch 1X2
- Cisco Fiber Switches N9K-C93180YC-FX
Find Similar Products By Category
- Telecommunications > Communication Equipment > Other Telecommunications Products
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
robert luo
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-