Home > Products > Optical Component > 1000Base-T SFP Transceiver telecom equipment

Share|

1000Base-T SFP Transceiver telecom equipment

Name: 1000Base-T SFP Transceiver telecom equipment
Brand: BAUDCOM-telecom equipment
Price: USD $16 - 20 / Unit

FOB Price

USD $16 - $20 / Unit

1 Unit(Min.Order)

Supply Ability 500 Unit / Units per Month
Port telecom equipment be shipped from shanghai port
Payment Terms:T/T L/C D/P D/A Credit Card PayPal

Request Sample Customized Request Download Product Catalog

Contact Now

Get lowest price Inquiry Basket

Product Details

Place of Origin:

Shanghai, China

Brand Name:

BAUDCOM-telecom equipment

Model Number:

BDTR-GB-P1RC, BDTRP113L1SN-20

Product Description

Product: 1000Base-T SFP Transceiver telecom equipment

Overviews

Baudcom’s BDTR-GB-PxRC Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address A0h.

Features

Up to 1.25Gbps bi-direction data links
100m transmission over unshielded twistedpair (UTP) Category 5 Cable
Support intelligent auto-negotiation 1000BASE-T operation in host systems with
SGMII interface
Hot-pluggable capability
SFP/GBIC form with compact RJ-45 connector
Very low EMI and excellent ESD protection
+3.3/5V Single power supply

Interface:

All high-speed signals are AC-coupled internally.

Table 3. High-speed electrical interface, transmission line-GBIC

High-Speed Electrical Interface Transmission Line-GBIC
Parameter	Symbol	Min	Typ	Max	Units	Notes/Conditions
Line Frequency	fL		125		MHz	5-level encoding, per IEEE 802.3
Tx Output Impedance	Zout,TX		100		Ohm	Differential, for all Frequencies between 1MHz and 125MHz
Rx Input Impedance	Zin,RX		100		Ohm	Differential, for all Frequencies between 1MHz and 125MHz

High-speed electrical interface, host-GBIC

Table 4. High-speed electrical interface, host-GBIC

High-Speed Electrical Interface, Host-GBIC
Parameter	Symbol	Min	Typ	Max	Units	Notes/Conditions
Single ended data input swing	Vinsing	250		1200	mV	Single ended
Single ended data output swing	Voutsing	350		800	mV	Single ended
Rise/Fall Time	Tr,Tf		175		psec	20%-80%
Tx Input Impedance	Zin		50		Ohm	Single ended
Rx Output Impedance	Zout		50		Ohm	Single ended

General Specifications

Table 5. General specifications

General
Parameter	Symbol	Min	Typ	Max	Units	Notes/Conditions
Data Rate	BR	10		1,000	Mb/sec	IEEE 802.3 compatible. See Notes 2 through 4 below
Cable Length	L			100	m	Category 5 UTP. BER <10-12

Notes:

1. Clock tolerance is +/- 50 ppm

2. By default, the BDTR-GB-P is a full duplex device in preferred master mode

3. Automatic crossover detection is enabled. External crossover cable is not required

4. 1000 BASE-T operation requires the host system to have an SGMII interface with no clocks, and the module PHY to be configured per Application Note AN-2036. With a SERDES that does not support SGMII, the module will operate at 1000BASE-T only.

Environmental Specifications

Table 6. Environmental specifications

Environmental Specifications
Parameter	Symbol	Min	Typ	Max	Units	Notes/Conditions
Operating Temperature	Top	0		85	°C	Case temperature
Storage Temperature	Tsto	-40		85	°C	Ambient temperature

Application:

LAN 1000Base-T
Switch to Switch interface
Switched backplane applications
Router/Server interface

Ordering information

BDTR-GB-P1RC	10/100/1000Mbps, SGMII interface, Copper SFP with spring latch
BDTR-GB-P3RC	1000Mbps only, SERDES interface, Copper SFP with spring latch

1000Base-T SFP fiber optic transceiver picture:

FAQ

1.How can i get a fiber optic transceiver sample ?

You need place sample order to us.We will arrange the sample production for you.

2.Could you do design for us?

yes, we can do artwork including printing, logo etc. for you, if you provide us the content and tell us where to put.

3.How can we place order?

After we made agreement on the product' parameters, we will make proforma invoice for your confirmation.when we got your advance payment (deposit) we will arrange the production and delivery.

If you have your own ship forwarder, we will use your ship forwarder to delivery goods. if you don't have ship forwarder, then when the goods arrived at Destination port, you must find a ship forwarder help you clear the custom.

4.How about the shipping for fiber optic transceiver ?

For small orders, we will send the goods by International Express like HK Fedex, DHL, TNT or UPS. usually it takes about 7work days to arrive.If big quantity we will ship by Ocean transportation, it takes one month to arrive. if urgnet, you can select shipping by Air, but freight charge will be more expensive.

6.what's your products' advantages ?

A. good quality and competetive prices.

B. Strictly quality control when producing.

C. Professional team work, from design, development, producing,assemble,packing and shipping.

D. Aftersale services, if there is quality problem, we will offer you replacement for defective quantity.

Packaging & Shipping

The devices will be well packaged by carton with Foam or other shock proof materials.

Certification

Factory production

Product testing

After-Sales Service

The goods warranty time is THREE years,we will provide best support by TEL,email,remote control or engineers in field.

Your any questions will be responsed within 12hours!

Contact Us

Shanghai Baudcom Communication Device Co., Ltd.: Contact namerobert luo; Phone86-21-37709251; Address519A, Building A, 389 Lianming Rd.

Product Categories

Ethernet Switch	fiber media converter	GEPON Access System	Hot Selling
Interface Converter	New Products	Optical Component	Optical Fiber Multiplexer
SDH Multiplexer System	Wholesale Product

New Products

1000Base-T SFP Transceiver telecom equipment

Product Details

Product Description

Contact Us

Popular Searches

Recommended Products

Find Similar Products By Category