Lead-Aicd MF VRLA 6V 4AH Battery 6V Matrix Battery
| Nominal Voltage | 6V | |
| Rated capacity(20 hour rate) | 4.0AH | |
| Dimensions | Length | 70±1mm(2.76inches) |
| Width | 48±1mm(1.89inches) | |
| Height | 101±1mm(3.98inches) | |
| Total Hight | 107±1mm(4.21inches) | |
| Weight Approx | 0.64Kg(1.42lbs) | |
| Capacity 25°C(77°F) | 20 hour rate(0.20A, 5.25V) | 4.00AH | |
| 10 hour rate(0.37A, 5.25V) | 3.70AH | ||
| 5 hour rate(0.68A, 5.25V) | 3.40AH | ||
| 1 hour rate(2.40A, 4.80V) | 2.40AH | ||
| Internal Resistance | Full charged Battery at 25 °C (77°F) |
25mΩ | |
| Capacity affected by temperature (20 hour rate) |
40°C(104°F) | 102% | |
| 25°C(77°F) | 100% | ||
| 0°C(32°F) | 85% | ||
| -15°C(5°F) | 65% | ||
| Self-Discharge at 25°C(77°F) |
Capacity after 3 month storage | 91% | |
| Capacity after 6 month storage | 82% | ||
| Capacity after 12 month storage | 64% | ||
| Charge (constant voltage) |
Cycle | Initial Charging Current less than 1.20A Voltage Charge 7.20~7.50V |
|
| Float | Voltage 6.75~6.90V | ||
| Terminal | T1 | ||
General features:
1)Extremely safe and stable chemistry
2)Non-spillable construction design
3)ABS containers and covers optional
4)safty valve installation of explosion proof
5)high quality and high realiability
6)exceptional deep discharge recovery performance
7)low shelf discharge characteristics
8)flexible design for multiple installation positions
Applications:
♦Telephone switchboards, electric equipments, medical equipments, medical instruments and meters
♦Computers and uninterrupted power source (UPS)
♦ower transmission and transformer station, switch control and accident lighting
♦ Fire fighting, safety device and alarm monitoring
♦Aviation, spaceflight and power storage
♦Automatic office system
♦ Radio communication
♦ Emrgency lighting and car and ship starting system
♦Portable electric appliances and mining system
♦Traffic and navigation signal lamp
Warnings:
1)- Matrix series accumulator have acid in the case and are fully charged before
leaving factory. Do not attempt to dismantle the accumulator, if accidental skin/eye
contact is made with electrolyte, seek medical advice immediately.
2)- Do not use a new battery with an old one.
3)- Do not use the battery in sealed container.
4)- Each battery should have detailed record including the ex-factory date,
installing date and using record.
5)- Check the connection of wire in a fixed interval (once a year). If there is
any looseness should tighten the wire.
6)- Wipe the surface of the battery with soft cloth in a fixed interval (once
three months) and always keep the accumulator clean.
7)- Avoid using any kind of organic solvents for cleaning the surface of the
accumulator.

Advantages :
1.Competitive prices with reliable quality.
2.Adopting high quality PP plastic for battery case, stronger and heatproof.
3.Plates made of high purity lead 99.994-99.996% dry charged battery
4.High quality AGM separator, pure acid
Send Inquiry to This Supplier
You May Also Like
-
Storage BatteryNegotiableMOQ: 2000 Sets
-
Untested Scrap Recycle Computer Hardware Used Laptop BatteryNegotiableMOQ: 10000 Pieces
-
32900 Rechargeable LiFePO4 3.2V 5500mAh Battery Cell for EnergyUS$ 4.5 - 5MOQ: 2000 Pieces
-
BATTERY FOR NDS NDS LITENegotiableMOQ: 10 Pieces
-
Sealed Lead Acid Dry Charged Battery 12v 4ah Battery for MotorcycleUS$ 5.33 - 5.9MOQ: 300 Pieces
-
Solar Generator With the Lithium-ion Battery S-1207US$ 20 - 500MOQ: 100 Pieces
-
12V Battery UPS Li-ion Battery Solar BatteryUS$ 60 - 78MOQ: 1 Piece
-
AGM Battery Separator Glass Fiber MatUS$ 1 - 10MOQ: 100 Kilograms
-
25C 3S Lithium Ion Battery 12V 11.1V 900mAh 3cell for Align KX019011 T-Rex 250 PROUS$ 1 - 100MOQ: 100 Pieces
-
12 Solar Light Lights AA 800mAh Rechargeable Battery Batteries Long Lasting 3 PaNegotiableMOQ: 3000 Pieces