Home > Bolts

Bolts

Browse 199 global buying requests and sourcing opportunities.
  • Inquiry about Dome Valve Kit with Actuator NEW
    I am looking for a dome valve kit with a 90-degree actuator. Specification: DN 125, working pressure 6 bar, test pressure 10 bar. I can provide drawings. Initial order quantity: 18 pieces (divided into batches of 5 at a time), plus another 10 pieces pending purchase order. Please quote minimum order quantity and pricing.
    Turkey Turkey
    Posted at: 2026-08-10 09:20:03
    ******
    View Contacts
  • Inquiry about Insert Seal for Dome Valve DN100 and Seal Kit

    I am looking for a supplier to provide the following items:

    - 9 pieces of Seal kit Ref. A4979
    - 10 pieces of Seal retaining ring Ref. P2728C-00
    - 60 pieces of Insert Seal for Dome Valve DN100 Ref. P1586C-01

    Please send your offer from your resellers price list.

    Morocco Morocco
    Posted at: 2026-08-07 02:24:21
    ******
    View Contacts
  • Inquiry about Stud Bolts, Hex Bolts, Heavy Hex Nuts and Washers
    I am looking to purchase carbon steel HDG stud bolts with 4 heavy hex nuts and 2 washers, stainless steel A316 stud bolts, and carbon steel HDG hex bolts with 1 nut and 1 washer. Sizes range from M10 to M20. All bolts and nuts should be grade A325 and A563, with washers per F436. Please quote your best price, dimensions, weight, and delivery cost to Dagenham, United Kingdom.
    Nigeria Nigeria
    Posted at: 2026-08-04 18:19:52
    ******
    View Contacts
  • Inquiry about Tungsten Carbide Blank Strips
    I’m looking for tungsten carbide blank strips. Dimensions: 5*10*300 mm. Grade: K10. Quantity: 20 pieces for sample evaluation. Please quote with lead time and shipping cost to Tunisia.
    Tunisia Tunisia
    Posted at: 2026-08-03 18:50:03
    ******
    View Contacts
  • Inquiry about Solid Brass Hardware for Leather Craft

    I am looking for solid brass hardware to be used in leather craft works. I have photos of around 40 different types of products that I need. Please confirm if you can produce these items using lead-free solid brass.

    Romania Romania
    Posted at: 2026-08-02 00:20:06
    ******
    View Contacts
  • Inquiry about Cast-in Manhole Steps

    We are looking for cast-in manhole steps for installation in reinforced concrete manholes. The steps must comply with EN 13101 and DIN 19555.  

    Technical requirements:  
    - Cast-in/embedded type, installed before concrete casting.  
    - Working width: 370 mm, step height: 140 mm, vertical spacing: 300 mm.  
    - 8 mm thick anti-slip surface, preferably chequered steel plate.  
    - Material: stainless steel AISI 316L or equivalent for aggressive environments.  
    - Must provide secure anchorage to reinforcement cage and remain stable during concrete pouring.  

    Please provide technical datasheet, detailed drawings, installation instructions, load capacity and test data, material specifications, and compliance certificates.  

    Commercial quotation should include unit price, MOQ, lead time, packaging, delivery terms (EXW/FCA/DAP), shipping dimensions/weight, and payment terms. Also send photos or installation details of your standard step for evaluation.

    Kazakhstan Kazakhstan
    Posted at: 2026-07-31 17:04:59
    ******
    View Contacts
  • Inquiry about Geared Motor
    We are looking to purchase geared motors with the following specifications: - Type: MRF07-Y0,12-4P-53,00-M4-0-120 - Manufacturer: MALI MOTOR CHINA - Motor: 0.12kW, 1330RPM, insulation class F, protection IP54 - Reducer: speed ratio i=53, output speed n2=25RPM, output torque 45Nm - Quantity: 2 Nos.
    India India
    Posted at: 2026-07-27 18:07:45
    J
    ******
    View Contacts
  • Inquiry about U-bolt
    I would like to request a quotation for the following U-bolts. Please provide weight, packaging dimensions, lead time, and shipping cost. 7/8" U-bolt x 9UNC R111 x L530 (8") - QTY: 30 7/8" U-bolt x 9UNC R111 x L430 (8") - QTY: 110 7/8" U-bolt x 9UNC R86 x L350 (6") - QTY: 10 7/8" U-bolt x 9UNC R86 x L410 (6") - QTY: 10 7/8" U-bolt x 9UNC R59 x L300 (4") - QTY: 10 5/8" U-bolt x 9UNC R66.6 x L230 - QTY: 400 5/8" U-bolt x 9UNC R66.6 x L245 - QTY: 600 5/8" U-bolt x 9UNC R66.6 x L260 - QTY: 400 1" U-bolt x 9UNC R66.6 x L330 - QTY: 200
    Nigeria Nigeria
    Posted at: 2026-07-22 08:14:43
    ******
    View Contacts
  • Inquiry about Door handles AS4145 compliant
    We are a residential builder based in Melbourne, Australia, looking to source door handles suitable for the Australian market. We require products compliant with AS4145 standards. Please provide your product range/catalogue, available finishes (chrome, matte black, brushed nickel, etc.), pricing (unit and bulk rates), MOQ and lead times to Melbourne. We also need information on relevant AU certifications and warranties. We have multiple active builds and would be interested in an ongoing supply arrangement if quality and pricing meet our requirements.
    Australia Australia
    Posted at: 2026-07-19 09:43:00
    ******
    View Contacts
  • Inquiry about Steel spare wheel carrier for Dong Feng Z9 pickup
    I am looking for a steel spare wheel carrier for a 2025 Dong Feng Z9 pickup. This vehicle does not come with a spare tire emergency kit. Please let me know if you manufacture this part for this specific vehicle. Thank you.
    United States United States
    Posted at: 2026-07-19 03:30:48
    ******
    View Contacts
  • Inquiry about Gasoline and Diesel Water Pumps
    We are looking for water pumps with the following specifications: - Gasoline water pumps: 2-inch and 3-inch outlets, suction head of 8 meters, capacity 30–60 m³/h. Quantity: one container. - Diesel water pumps: 3-inch outlet, capacity 60 m³/h. Quantity: 200 pieces. Please provide product details and quotation.
    Bosnia and Herzegovina Bosnia and Herzegovina
    Posted at: 2026-07-18 04:30:03
    ******
    View Contacts
  • Inquiry about Gooseneck Tube
    I am looking to purchase gooseneck tubes. Could you please provide me with the latest price? I can share specific requirements upon request.
    Malaysia Malaysia
    Posted at: 2026-07-16 10:20:03
    ******
    View Contacts
  • Inquiry about Aluminum Mezuzah and Talit
    I am looking for a manufacturer who can produce Aluminum Mezuzahs and Talits. The products must be Kosher and made according to Jewish traditions. I would like to know the minimum order quantity and pricing.
    Spain Spain
    Posted at: 2026-07-15 16:20:02
    ******
    View Contacts
  • Inquiry about Plastic Screw Pin
    We are looking for plastic screw pins. The required quantity is about 100 pieces. We would like to know the price first.
    United States United States
    Posted at: 2026-07-08 22:20:02
    J
    ******
    View Contacts
  • Inquiry about STIEBER NFR30/NFR30V One Way Roller Freewheel Bearing
    I need STIEBER roller type freewheel bearings, model NFR30 and NFR30V, size 30x90x48mm. Please send me your best offer with availability. Looking for reliable supplier.
    Germany Germany
    Posted at: 2026-07-07 16:13:02
    ******
    View Contacts
  • Inquiry about ALS40 bearing
    I am looking for an ALS40 bearing, model LJT5E. Quantity needed: 1 piece. Please contact me with availability and pricing.
    Philippines Philippines
    Posted at: 2026-07-06 16:10:05
    ******
    View Contacts
  • Inquiry about Torispherical Tank Heads
    We need to purchase Torispherical Tank Heads in Q235B with EN 10204 3.1 certificate. Specifications (thickness after embossing): - De 2500 x 6 mm — 20 pcs - De 2512 x 5 mm — 10 pcs - De 3000 x 6 mm — 20 pcs Total weight approximately 14.76 metric tons, total volume around 30 CBM. Please quote FOB and CFR Douala, Cameroon for bulk shipment.
    France France
    Posted at: 2026-07-04 16:38:47
    ******
    View Contacts
  • Inquiry about Scarifier Cutter
    I am looking for scarifier cutters with 5 points and 6 points. I need 600 pieces for each model. If these are not available, please also inform me about 8 points, similar to your photo.
    Brazil Brazil
    Posted at: 2026-07-02 23:20:02
    M
    ******
    View Contacts
  • Inquiry about Pneumatic Actuator for Dome Valve DN200

    I am looking for 4 pieces of pneumatic actuator for dome valve DN200 with the following specifications:
    - Diameter: 100 mm
    - Stroke: 250 mm
    - Pressure: 16 bar
    - Part number: P22457E-00

    Please provide quotation price, delivery time, and datasheet under EXW incoterm.

    India India
    Posted at: 2026-07-02 05:50:21
    ******
    View Contacts
  • Inquiry about PA6 Nylon Industrial Structural Components
    We are sourcing a package of PA6 (Nylon 6) industrial structural components, all in natural color and unbranded, equivalent to European industrial application standards. The requirement includes: - M12 fully threaded rods in three lengths: 230mm, 160mm, and 300mm - M12 standard hexagon nuts (DIN 934) - Custom concave radiused large washer, OD 90mm × ID 12mm, concave profile Please quote FOB prices, MOQ, production lead times, and tooling options. For the custom washer, include the one-time tooling/injection mold fee separately. Confirm the exact raw PA6 material grade used.
    Greece Greece
    Posted at: 2026-07-01 21:19:39
    A
    ******
    View Contacts
  • Inquiry about Friction Stay and Esbag
    We are from Cromsen Importers India. We are interested in purchasing friction stays and esbags for door and window applications. Please provide product specifications and details.
    India India
    Posted at: 2026-06-29 22:10:08
    ******
    View Contacts
  • Inquiry about Actuator for Dome Valve
    We need to source an actuator for a dome valve, with reference to Clyde Bergemann Huatong material handling type. Quantity required: 4 pieces. Please provide details and quotation.
    India India
    Posted at: 2026-06-29 16:30:02
    ******
    View Contacts
  • Inquiry about 7602-0200-51 Main Bearing

    I need one piece of main bearing, part number 7602-0200-51. Please provide the specification of this bearing.

    India India
    Posted at: 2026-06-29 14:40:07
    E
    ******
    View Contacts
  • Inquiry about Cleanroom Floor Drain
    We are looking to purchase cleanroom floor drains for an upcoming project. The required specifications include stainless steel 304 material, sanitary grade water seal, and anti-odor design. The drains must be suitable for cleanroom applications, with a maximum overall height of 280mm and connection sizes compatible with 3-inch and 4-inch piping. Please provide your product catalogue, technical datasheets, and quotation. We are particularly interested if you have models suitable for pharmaceutical facilities.
    Iran (Islamic Republic of) Iran (Islamic Republic of)
    Posted at: 2026-06-22 21:09:17
    M
    ******
    View Contacts