Recycling Precious Metals From Circuit Boards Process
Recycling Precious Metals From Circuit Boards Process Description:
1)After the gold plating waste is loaded into the drum , the drum is lifted to the working position of the deplating tank (level 1 deplating tank) by a crane, and the motor is started to rotate the deplating tank.
2)After the deplating is completed, lift and drain the drum, then rinse it and enter the second level cleaning tank. Afterwards, dry it according to the actual situation.
3)After multiple de deplating processes, the gold content in the de plating solution reached a certain concentration (1.5g/L), and the solution was electrodeposited to recover gold. After electrodeposition, the gold content in the solution decreased to 0.4mg/L.
Send Inquiry to This Supplier
You May Also Like
-
99.99% High-purity Silver Electrolysis MachineNegotiableMOQ: 10 Sets
-
Electrowinning SystemNegotiableMOQ: 6 Sets
-
Vacuum Gold Bar Casting MachinesNegotiableMOQ: 6 Sets
-
High Current Density Gold Electrolytic UnitNegotiableMOQ: 10 Sets
-
High Current Density Silver Electrolytic UnitNegotiableMOQ: 10 Sets
-
High Current Density Copper Electrolytic CellNegotiableMOQ: 1 Set
-
Platinum Palladium Rhodium Purification System EquipmentNegotiableMOQ: 10 Sets
-
Precious Metal Wet Refining SystemNegotiableMOQ: 10 Sets
-
Oxygen Enriched Bottom Blowing FurnaceNegotiableMOQ: 6 Sets
-
Vacuumingot Casting MachineNegotiableMOQ: 6 Sets
