ZF4WG200 gearbox transmission for xcmg liugong sdlg lonking wheel loader 3999usd per unit

ZF WG powershift transmission offers everything technically possible to make wheel loader application more efficient,effective and safe. Through modular design,WG transmission can be tailored to exact technical needs.Depending on application and maximum speed,there is a choice for 3 or 4 forward and reverse gears.Since wheel loader work 30% of the time in reverse,closed gear stepping in forwards and reverse are particularly important for efficiency and service life.

4WG200 transmission can be supplied with semi or fully automatic shift control system.The operator is relieved of routine manual gearshifts the transmission gears being engaged automatically increasing transmission efficiency and service life especially during reversing operation. Pressure cut-off system can switch full englie power to shovel for improved working characteristics particular for wheel loader application.1 or 2 engine dependent PTOs are capable of using full engine power,output flanges for various shafts, parking brakes,axle disconnection and speedometer drive connection are also available.

For ZF range select DW-3,which has 2control direction “Forward-Neutral-Reverse” by pull(or push)the shift lever;and defferent gears can be set by turning the shifting lever.Thers is gears lock for neutral position.

Kick-down Function(only available at 1st and 2nd gears)on ZF range selector offer an easy and comfortable operation system for wheel loader drivers,during the operation.

Engine speed max..：

2,800rpm

Turbine output torque max.

1,500Nm

Toque converter

F &Sφ

340mm Stall torque ratio

Standard

2.55

Option

1.5-3.2

Engine connection：

Direct mounted

Via SAE2#

Separate mounted

Mech 6c/DIN 150Flange

Transmission ratio：

Standard

555mm

Option

500mm

Transmission ratio：

4WG200

Standard:

1st gear

2nd gear

3rd gear

4th gear

Forward

4.278

2.368

1.126

0.648

Reverse

4.278

2.368

1.126

Option

Forward

4.576

2.533

1.238

0.713

Reverse

4.576

2.533

1.238

6WG200

Standard:

1st gear

2nd gear

3rd gear

4th gear

5th gear

6th gear

Forward

5.991

3.447

2.596

1.494

1.179

0.678

Reverse

5.991

2.596

1.179

Option

Forward

5.378

3.099

2.596

1.494

1.179

0.678

Reverse

5.378

2.596

1.179

Output flange：

Standard：

DIN180/DIN 150/Mech 7C

Option

Mech8.5C

Parking brake

With

Drum/disc brake spring pre-loaded

Or without

Engine dependent PTO

Torque max： 700Nm

PT01:

Standard：

SAE C2/4Hole 12/24DP Z=14

Option

SAE B2/4Hole 16/32DP Z=13

PT02:

Standard：

SAE C2/4Hole 12/24DP Z=14

Option

SAE B2/4Hole 16/32DP Z=13

Control system：

Electrial&hydraulic control system

Semi-automatic version

EST-17/T

Fully-automatic version

EST-25

Range selector

Standard：DW-3/ERGO-2

Option:SG-6

Speedometer drive：

Electronic

Emergency pump：

Option:16ml/rev.or 32ml/rev.