Non-sparking Fine Stone Concrete, Non-sparking Cement Mortar, Concrete Ground, Metal Aggregate

Non-sparking Cement Mortar

I. Product Introduction:

It is mainly composed of dolomite, quartz sand, additives, special cement, etc. This product is non-sparking, with high impact resistance, moisture resistance, strong decorative properties, no dusting, easy construction, and does not generate sparks when encountering impact or friction.

II. Product Features:

1. The floor does not generate sparks when rubbed by metal materials.

2. The pre-packaged product does not require the addition of other materials.

3. It can resist grease and is easy to clean.

4. It can be integrally combined with the newly poured concrete surface, with a short construction period.

5. The non-metallic aggregate does not rust in a humid environment, and the floor surface can increase its smoothness after continuous use.

III. Construction Dosage:

1. The recommended dosage is 18 - 20 kg/cm/m².

2. The water-cement ratio is 0.15.

IV. Packaging and Storage:

1. Packaging: Composite kraft paper bag; 50 kg/bag.

2. Storage: It should be stored in a cool, dry, and well-ventilated indoor area and can be stored in an environment below zero degrees.