KL-029 multi-point wireless remote digital acidity meter

Multi-point wireless remote digital acidity meter is an instrument for measuring water quality, which is suitable for chemical reaction tank (tower), chemical sedimentation tank (tower), reaction kettle, water pool, swimming pool, fish pond, bath and other places.

The wireless remote digital PH meter is composed of a transmitter and a receiver set, the transmitter is sealed waterproof structure, is placed in the detected solution pool to measure the PH value of the solution, and the data is transmitted wirelessly to the receiver, people can use the receiver to observe the pH value of the measured solution pool at a distance.

● Remote monitoring of solution pool pH

● Transmitter (measuring PH rod) transmits PH value to receiver (display end) through wireless signal

● Data transmission open distance up to 80 meters

● Transmitter sealed waterproof structure, can be placed in the solution pool

● One receiver can have up to 6 transmitters, and the PH value sent by the 6 transmitters can be displayed in turn.

● Each instrument has a corresponding address code when it leaves the factory. When multiple instruments work together, the receiver only receives the signal of the transmitter, and different sets do not affect each other.

Technical parameter

1. Transmitter technical parameters

Measuring range: 4.1 ~ 8.8ph

Resolution: 0.1

PH accuracy: ±0.1

Automatic temperature compensation: 0℃ ~ 50℃

Automatic calibration: two point calibration or single point calibration

Display: LED light indication

Power Supply: 3 5 batteries

2. Receiver technical parameters:

LCD display: PH value and transmitter number

Receiving distance: 80 meters

Power Supply: DC6V

Dimensions: 100 x 146 x 48 mm

Acidity meter is a common equipment,also known as PH meter, which is mainly used for precise measurement of pH value of liquid medium, and can also measure MV value of ion electrode potential with corresponding ion selective electrode. It is widely used in industry, agriculture, scientific research, environmental protection and other fields. If the electrode an be properly maintained in use, prepare the standard buffer solution as required and operate the electrometer correctly, which can remarkably reduce pH indication error, so as to improve the reliability of chemical experiment and test data.

Taking the acidity meter produced by Kelilong Electron Co.Ltd in Fujian,China as an example. It usually divided into four categories: industrial on-line acidity mete, table type acidity meter, portable acidity meter and pen type acidity meter.As shown in Figure 1.