Battery SAPHIR Energy Storage PLATINE12-24 DC Screen UPS/EPS Power Supply

1、 Main technical characteristics of French SAPHIR batteries

1. SAPHIR batteries and accessories are only produced in OUTARVILLE, France, and quality is a guarantee of confidence.

2. The battery casing is made of colored, high impact resistant, fully flame-retardant polypropylene material, with a flame retardant rating greater than 28% LOI standard. The water vapor permeability is extremely low, maintenance is minimal, and the lifespan is longer. At the same time, anti-counterfeiting function is added to ensure the quality of the battery. 

3. The side of the shell adopts thick vertical integrated ribs, which are common bulging images in small and medium-sized batteries.

4. Unneeded battery cabinets or battery rooms, suitable for outdoor use without affecting their electrical performance.

5. The top of the battery is equipped with a safety valve external gas recombination mechanism. The gas that cannot be recombined inside the battery is fully absorbed through the oxygen excess principle of the recombination mechanism, so that the battery has no harmful waste gas and acid discharged. Therefore, it can be directly installed in the control room of the computer room, without any harm to the human body. 

6. The battery adopts a humanized design, and each battery is equipped with a handle for easy carrying, installation, and maintenance

7. Using lead tin titanium alloy as the electrode material of the battery to achieve the discharge performance and stability of small and medium-sized capacity batteries. (An appropriate amount of tin helps to enhance the strength of the electrode plate, silver improves the discharge performance of the electrode plate, and titanium helps to prolong the lifespan of the electrode plate)

8. The SAPHIR series batteries of high quality are the top products among small capacity sealed batteries, which can meet the limit requirements of the EUROBAT regulations. Under normal use, there is no need for uniform charging, reducing maintenance workload.

9. SAPHIR is designed for harsh environments or important locations, suitable for outdoor use, and therefore requires minimal maintenance. 

10. After high-temperature acceleration testing, its float charging life reaches 15 years longer than that of small and medium-sized batteries 

11. Due to the adoption of gas composite uniform control technology, alloy plate technology, slot formation control technology, and liquid addition process, the performance uniformity of SAPHIR batteries fully meets the limits of UTE NO NFC15-100. In the future expansion and renovation, whether connected in series, parallel, or mixed series, the stability of the entire group's performance can be guaranteed. And there is no need to invest in replacing new batteries.

2、 Precautions before installation

1. After checking that there are no abnormalities in the battery, install it in the location (e.g. battery room);

If the battery is placed in the battery room, it should be placed as low as possible in the battery room;

3. Avoid installing batteries near heat sources (such as transformers);

4. Due to the possibility of producing flammable gases during battery storage, installation should avoid approaching devices that generate sparks (such as fuses);

5. Before connecting, polish the battery terminals to make them appear metallic;

6. Be careful to short-circuit the positive and negative terminals of the battery with conductive materials.

When using multiple batteries together, first ensure that the connections between the batteries are correct, and then connect the batteries to the charger or load. In this case, the positive pole of the battery should be connected to the positive pole of the charger or load, and the negative pole should be connected to the negative pole. If the battery and charger are not connected correctly, the charger will be damaged, so be careful not to connect incorrectly. Remember to connect correctly.