Source Water Park Wind Pressure Tsunami Wave Making Construction Outdoor Artificial Wave Making Pool Tsunami Pool Project Undertaken

1. Vacuum wave maker

The vacuum wave maker mainly consists of a vacuum pump, pipeline system, actuation system, valve system, 

control system, and air chamber. Its working principle is: the vacuum pump is used to raise the indoor water level, 

and the control system sends signals to the actuation system according to the pre designed wave spectrum, 

controlling the opening and closing of the valve system, ultimately affecting the high and low water level

 in the chamber, thereby generating waves. The main feature of the vacuum wave maker is that it can create 

large waves of more than 2 meters, which is a translational flow with extremely magnificent momentum. 

But its structure is complex and expensive, mainly used for large surfing and skateboarding wave making pools

 and experimental pools. Design principles of artificial wave making pools in swimming pools

Vacuum wave making, also known as tsunami wave making, uses a force sensing system to collect vacuum and 

instantly control the opening of the vacuum raft door for wave making. It can create continuous waves 

of 1.5 meters and giant waves of up to meters in height. The principle and characteristics of the equipment are 

as follows: Vacuum wave making equipment uses an air pump to vacuum the air chamber. Water is compressed

 into the air chamber due to atmospheric pressure, and when it reaches a certain level, it is released, 

which is equivalent to lifting the water and releasing it to form large waves. It can simulate the effect of a tsunami. 

The waves formed range from approximately 0.5 to 3 meters, with 5 to 8 types of waves. The cost of vacuum wave

 making equipment is relatively high. Suitable for large wave making pools over 100 meters. In addition, 

vacuum wave making is relatively high, so it is recommended to wear a swimming ring to play.

 (The area of the vacuum wave making pool is generally between 5000-20000 square meters, 

with a water depth of 0-2.6m)

2. Blower wave maker

In recent years, the construction of water amusement parks has shown a rapid development trend, and the 

wave making pool, as a very important amusement facility that accumulates popularity in water amusement parks, 

is almost a necessary product of water amusement parks. The wind blowing wave making method is more easily 

accepted by the construction party due to its advantages of simple construction, low operating costs, variable 

waveforms, and convenient maintenance.

An air wave maker is a device that introduces the strong airflow blown out by a high-pressure centrifugal fan 

into an air chamber, and compresses the free water surface inside the chamber to generate wave currents through 

repeated pumping of air. By changing the frequency and size of the exhaust airflow, the size and length 

of the waves can be changed. The air wave generator mainly consists of an air chamber, a fan, a valve mechanism, 

a speed control mechanism, an air duct system, a control system, etc. Its characteristics are simple structure,

 reliable use, convenient maintenance, pollution-free, and safety. It is a major highlight product in leisure places, 

but the disadvantage is slightly higher noise. It is currently the most commonly used wave making method in water

 play.

The principle and characteristics of blast wave making (pneumatic wave making, wind pressure wave making, 

wave pool) equipment: The blast wave making equipment is simple, cost-effective, and flexible in application.

 Due to the fact that the method of wind blowing to create waves can be controlled through calculation 

and has a short wave making cycle, generally ranging from 2.5 to 3.1 seconds per wave, it is currently 

the commonly used wave making method in water play. (Water depth 0-1.8m)

The blast wave making equipment is mainly powered by a fan to inflate the pressure chamber, 

which forms a high-pressure release and swells water to form waves. The formed waves have a wave 

length of approximately 5-8m and a wave height of 60-120cm. There are 5-8 types of waves 

(wave, surge, oblique wave, diamond wave, left and right waves, bilateral waves, raised waves, 

and stepped waves). The cost of blast wave making equipment is low, and the wave making cycle is short,