bulk-fodder transport truck

(Optional electric drive hydraulic)

Chassis configuration:

Chassis model: DFH1310D7/ Wheelbase: 2050+4600+1350/D320 High-top two-bedroom cab/Engine: DDi11E465-60/ Dongfeng 14-speed DT1422 transmission /5/10T front and rear axle /300*80*8 frame /12R22.5 18PR vacuum tire rear market differentiation package (10-inch screen, four-way monitoring function)/manual sunroof /180Ah battery.

Top configuration:

Tank volume 50 cubic meters, the main features of the car:

⦁ The tank body is made of 2MM high-strength steel, and the auxiliary beam is 5MM high-strength steel, which is bent and formed in one time. The standard is divided into four silo. It has wear resistance and corrosion resistance. Lightweight design, after sandblasting, rust removal, pickling treatment. Effectively prolong the service life of tan and paint. Circular design, hydraulic head, cylinder plate machine automatic welding. The strength of the tank i increased, and it can cope with the winnowing road easily. The aluminum alloy folding protective guardrail at the top of the tank greatly protects the safety of the operator.

⦁ Bottom double twisted dragon, the center of gravity of the vehicle is lower, which improves the safety and comfort of driving. In case of foreign matter entering the warehouse, a twisted dragon can be used to continue to complete the feed unloading. The hydraulic opening mechanism can be used to open or close any warehouse. When transporting the same material, multiple warehouses can be unloaded at the same time. The top winch is placed near the edge of the tank, and the winch of the same length is longer and higher than the middle winch.

⦁ The hydraulic oil pipe is hidden in the bottom of the tank, and the whole vehicle is round and smooth. Easy to clean. Avoid disinfection, high temperature baking, increase the aging of the tubing.

Four, skein dragon: the whole car 5 skein dragon (skein dragon shaft is 20# seamless precision cold-drawn tube, skein dragon blade high-strength steel pickling cold-rolled wear-resistant, the outer tube is Q235 straight seam tube, all link shaft is 40# steel), unloading skein dragon 9 meters. Optional bottom or side discharge of tank body.

⦁ Hydraulic: imported Eaton motor, feed truck special multi-way valve. 180L hydraulic oil tank with 150 L capacity, pressed hydraulic oil tank, integrated molding bracket.

⦁ winch lift rotation, standard with double remote control. Automatic radiator, open power extractor The radiator automatically opens (can also be closed in cold areas). Top pneumatic sliding cover, good sealing. The outlet of the winch has a pneumatic seal cover and a spotlight for night operation. When the winch lifting operation, the warning light will flash, reminding the passing vehicle and personnel to pay attention to safety, reminding the driver that the winch is not put normally, the vehicle is prohibited to start, so as not to cause heavy losses.