Hengyang Heavy Industry Safety Brake SBD160-B With Fault Indication

There shall be no flammable, explosive and enough to corrode metal, damage insulation gas and conductive dust around the brake 3.5 Outdoor rain and snow erosion or corrosive gases and media should be anti-corrosion type products.

Pneumatic disc brake adopts brake body for cavity type, pneumatic disc brake around the drum joint gap, usually four weeks above at the same time with by sealant sealing. Such as the use of five-hole brake, can be inserted into the sealing plate after contact with the plate, brake loaded with rosin braking turbine, metal and other materials for sealing. It can be seen that the pneumatic disc brake has other working principles, such as the turbine principle, the metal principle, the brake valve principle and so on.

The pneumatic caliper disc brake effectively controls the cylinder piston to rotate back and forth, improves the combustion resistance of the cylinder, and produces good braking ability.

It consists of DC coil, control coil and transmission parts, and its working principle and function are the same as that of electric vehicles. Normally open pneumatic disc brake is divided into two kinds of batteries and radiators. The driving parts on this kind of electric car is the whole battery, the energy of the battery is used for gravity brake, and the contact is controlled by the wire rope, and the driving parts are connected with the motor control coil through screws. Normally open electric disc brake has the characteristics of fast starting, sensitive acceleration, safe and reliable, easy to operate and so on.