Lower Cost Vertical Grinding Mill Used In Such Small Industries

Lower Cost Vertical Grinding Mill Used In Such Small  Industries

Vertical Grinding Mill Introduction:

Raymond mill is a kind of equipment used for high-fine powder processing of more than 280 kinds of materials in mining, chemical, construction and other industries.

Raymond mill is widely used in the fine powder processing of more than 280 kinds of materials in non-flammable and explosive industries such as barite, calcite, feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, glass, thermal insulation materials, etc. with Mohs hardness not more than 9.3 and humidity below 6% in mining, chemical, construction and other industries. The finished particle size of R-type Raymond mill can be adjusted arbitrarily within the range of 80-325 mesh, and some materials can reach up to 600 mesh.

Vertical Grinding Mill Main Structure:

The structure of the machine is mainly composed of the main machine, analyzer, fan, finished product cyclone separator, micro powder cyclone separator and air duct. Among them, the main machine is composed of a frame, an air inlet volute, a scraper, a grinding roller, a grinding ring and a cover.

Working Principle of Vertical Grinding Mill:

During operation, the material to be crushed is added into the machine from the feed hopper on the side of the machine cover. The grinding roller device hanging on the main machine plum blossom frame revolves around the vertical axis and rotates itself at the same time. Due to the centrifugal force during rotation, the grinding roller swings outward and presses against the grinding ring, so that the scraper scoops up the material and sends it between the grinding roller and the grinding ring. The purpose of crushing the material is achieved due to the rolling and crushing of the grinding roller.

Vertical Grinding Mill Technical Parameter:

Vertical Grinding Mill