Guangzhou Yingpeng Explosion-proof Particle Snowflake Machine-130

brand

Yingpeng

model

BL-400KXH/85

BL-400KXH/100

BL-400KXH/130

BL-400KXH/160

Dimensions (length * width * height)

500 * 640 * 965mm

500 * 650 * 965mm

670 * 650 * 1140mm

670 * 665 * 1145mm

voltage

220 V/50 Hz

power

460 W

480 W

600 W

810 W

Nissan

Ice content

85KG

100KG

130KG

160KG

product

weight

55kg

57kg

57kg

73kg

Ice shape

Irregular granular shape

refrigeration

mode

Air cooled/water cooled

Wooden box packaging size

600 * 740 * 1065mm

600 * 740 * 1065mm

770 * 750 * 1240mm

770 * 765 * 1245mm

Explosion proof level

ExdibmbIICT4Gb

Product features:

1. Adopting hot fluorine deicing method, the deicing speed is fast;

2. Add deicing and drainage function to instantly drain the remaining water in the cold water tank during deicing, making the ice cleaner and more transparent;

3. Good overall performance, low noise, and high reliability;

4. The microcomputer automatic control system ensures safe and stable operation;

5. The optimized design of the ice knife blade makes the ice shape small and practical;

6. The refrigerator is made of food grade PE material, which fully meets the requirements of food hygiene;

7. Large ice storage cabinet door panel, easy to remove and clean ice;

8. Spiral roller extrusion ice making type, compact structure, achieving automatic separation of ice and water;

9. The evaporator tube is made of red copper material, supplemented by a special nickel plating process to extend its service life and improve refrigeration efficiency.

Working principle: The particle snowflake machine is a refrigeration mechanical equipment that cools water through an evaporator and generates ice through a refrigeration system refrigerant. It uses a refrigeration system and water as the carrier to produce ice through the equipment in an energized state.

Safety precautions:

1. The particle snowflake machine cannot be installed in extremely humid areas, otherwise water may splash the machine and reduce the insulation of the equipment, causing short circuits or electric shock;

2. Never use wet hands to plug in or touch other electrical components of the particle snowflake machine, nor operate the switch of the particle snowflake machine, otherwise electric shock may occur;

3. The water pressure requirement for the particle snowflake machine is 0.5-6.0kg/cm2. If the water pressure is too high, it can cause pipeline rupture and water will leak out of the cracks, damaging the surrounding environment;

4. Do not put your hand into the ice discharge port of the particle snowflake machine, otherwise it may catch your hand and cause damage;

5. Never place your hand on the ice falling mouth, as falling ice from this mouth can damage your hand.

Applicable places: Widely used in laboratories, research institutes, chemical engineering, biopharmaceuticals, fishing refrigeration, mine cooling refrigeration, medical applications, as well as meat, vegetable and fruit preservation and transportation, food freshness