Mitsubishi Q06HCPU module

Mitsubishi Q06HCPU module

Mitsubishi Q-series PLC * * * CPU module - Q06HCPU program capacity: 60k steps I/O points: 4096.

Product Features

1. The * * * QCPU is designed for medium to large-scale systems, which not only significantly improves the processing performance of CPU modules and program register capacity, but also improves the performance of data communication with network modules and programming peripherals.

2. The supported local I/O can reach 4096 points, and the program capacity is 252K steps.

3. Fast instructions only take 34 nanoseconds. In addition to using ladder diagram, statement table, ST (structured text, high-level programming language like), SFC, FB and other five programming languages for programming, structured programming is also supported, with 252 programs.

4. Built in standard RAM and ROM, and can also be plugged into a memory card. There are two programming interfaces, 12M USB and 115K RS232 (excluding Q02CPU).

5. * * * QCPU can support up to 4 CPUs, and a system can integrate sequence control CPU, process control CPU, motion control CPU (96 axis), and PC CPU.

Storage environment temperature: -25-75 ℃ * 3

Seismic resistance: in accordance with JIS B3501 and IEC61131-2 standards

Impact resistance: in accordance with JIS B3501 and IEC61131-2 standards

Working environment: No corrosive gases present

Ground height: ≤ 2000m (6562ft)

Installation position: inside the control board

Overvoltage level: II

Pollution and: ≤ 2

Control method: Repetitive operation of stored programs

Input/output control method: refresh method

Programming languages: Sequential Control * * * Language, Relay Symbol Language, Logic Symbol Language, SFC (MEL. SAP-3)

Constant scanning: 0.5~2000ms

Program capacity: 60K steps

Number of files: 60

Number of input and output soft component points: 8192 points (X/Y0~1FFF)

Consumption current: 0.64A

Function input 【 FX 】: 16 points (FX0~F)

Function input [FY]: 16 points (FX0~F)

Function register [FD]: 5 points (FD0~4)

Counter: Normal counters default to 1024 points (C0-1023),

Interrupt counter 2128 points (default 0 points, set using parameters)

1. Mitsubishi full series PLC, frequency converter, human-machine interface, servo system.

2. Xinjie PLC, frequency converter, human-machine interface and servo system.

3. Delta PLC, frequency converter, human-machine interface and servo system.

4. Wellington human-machine interface and Hytec human-machine interface.

Mitsubishi servo motor HG-JR15K1MB;

Mitsubishi servo motor HG-JR11K1MB;

Mitsubishi servo drive MR-J4-11KA

Mitsubishi servo drive MR-J4-11KB

Mitsubishi servo drive HG-KR-23J with oil seal

Mitsubishi servo store HG-KR053

Mitsubishi servo motor HG-KR73BJ with oil seal

Mitsubishi servo motor HG-SR102BJ with oil seal

Mitsubishi MR-J4-15KB servo driver

Mitsubishi PLC (programmable controller) A, R, Q, L, CC-LNK, FX3SA, FX3G, FX3G, FX3U, FX5U and other series;

Mitsubishi frequency converter A840, E840, F840, E740, D740, D720 series; Mitsubishi touch screen GT2000 series; Mitsubishi servo motor JE, J4 series.

Mitsubishi programmable controller: FX3GA, FX3GE, FX3G, FX3U, FX3UC, FX2NC, A, Q, CC-LINK remote module and other series

Mitsubishi variable frequency governor: FR-L700, FR-A700/500, F700/500, E700/500, D700/500, S500 and other series;

Man-machine interface: GOT2000, GOT16, GOT15, GOT12, GOT11, GOT10, A900GOT, F900GOT and other series;

AC servo system: MR-J4, MR-JE, MR-J3, MR-J2S, MR-E, MR-ES and other series;

Tension control system: LE-40MTA (B), LD-FX, LD-50PAU and other series:

Low-voltage electrical appliances: S-N, TH-N, etc.