Mitsubishi Q26UDEHCPU Universal high-speed CPU

Mitsubishi Q26UDEHCPU Universal high-speed CPU

Mitsubishi universal high-speed CPU Q26UDEHCPU parameters: 4096 input and output points, 8192 I/O software components, 260k program capacity, basic command processing speed (LD X0) of 9.5ns, program storage capacity of 1040k bytes, * * * speed communication between multiple CPUs, interfaces with USB and Ethernet, and memory card.

Mitsubishi PLC Q26UDEHCPU product specifications:

【 Control method 】 Repeated operation of stored program

[I/O Control Mode] Refresh Mode (When directly accessing I/O (DX, DY) through * * *, I/O can be directly accessed.)

【 Program Language 】 Sequential Control Language (Relay Symbolic Language, Logic Symbolic Language, MELSAP3 (SFC), MELSAP-L, Function Block, and Structured Text (ST))

Processing speed (sequence control program instructions): 9.5ns (LD X0), 19ns (MOV D0 D1)

[Constant scanning (function used to maintain normal scanning time)] 0.5~2000ms (can be set in units of 0.5ms)

【 Interface 】 USB, Ethernet

【 Program Capacity 】 260k steps and 1040k bytes)

Memory capacity

·Program memory (drive 0): 1040k bytes

·Memory Card (RAM) (Drive 1): The capacity of the installed memory card (8M bytes)

·Memory Card (ROM) (Drive 2): Capacity of installed memory card (Flash card: 4M bytes, ATA card: 32M bytes)

·Standard (RAM) (Drive 3): 1280k bytes

·Standard (ROM) (drive 4): 4096k bytes

·QCPU standard memory (CPU shared): 8k bytes

·Multi CPU high-speed communication area (CPU shared): 32k bytes

[Number of files stored]

·Program memory: 252

·Memory card (RAM): 319 (when using Q3MEM-8MBS)

·Memory card (ROM): 288 (flash memory card), 511 (ATA card)

·Standard RAM: 4

·Standard ROM: 256

[Number of intelligent function module parameter settings] Initial 4096, refresh 2048

[Number of allowed writes to program memory] 100000 times

[Number of allowed writes in standard ROM] 100000 times

[Number of I/O soft component points] 8192 points (X/Y0~1FFF)

[I/O points] 4096 points (X/Y0~FFF)

[Directly linking software components]

A software component used to directly access linked software components*** Used for MELSECNET/G and MELSECNET/H.

***The form is J □□ X □□, J □□ Y □□, J □□ W □□, J □□ B □□, J □□ SW □□, J □□ SB □□

Intelligent Function Module Software Component: A software component used to directly access the buffer memory of the intelligent function module*** The form is U □ □ 7 G □ □

[Latching (power outage hold) range] L0~8191 (default 8192 points) (the locking range can be set for B, F, V, T, ST, C, D, and W)

[RUN/PAUSE contact] One contact can be set in X0 to 1FFF for each of RUN and PAUSE.

The allowable instantaneous power failure time varies depending on the type of power module

【 5VDC internal current consumption 】 0.49A

Q26UDEHCPU built-in Ethernet functional specifications

Transmission Specification

·Data transmission speed: 100/10Mbps

·Communication mode: full duplex/half duplex

·Transmission method: baseband

·Transmission distance: 100m

·Number of nodes/connections: 10BASE-T cascade connection level 4, 100BASE-TX cascade connection level 2

There are a total of 16 connections for communication, MELSOFT connection, MC protocol, and 1 for FTP.

1. The overall dimensions are 98 (H) * 27.4 (W) * 115 (D) [mm]

2. Weight 0.22kg

1. Mitsubishi full series PLC, frequency converter, human-machine interface, servo system.

2. Xinjie PLC, frequency converter, human-machine interface and servo system.

3. Delta PLC, frequency converter, human-machine interface and servo system.

4. Wellington human-machine interface and Hytec human-machine interface.

Mitsubishi servo motor HG-JR15K1MB;

Mitsubishi servo motor HG-JR11K1MB;

Mitsubishi servo drive MR-J4-11KA

Mitsubishi servo drive MR-J4-11KB

Mitsubishi servo drive HG-KR-23J with oil seal

Mitsubishi servo store HG-KR053

Mitsubishi servo motor HG-KR73BJ with oil seal

Mitsubishi servo motor HG-SR102BJ with oil seal

Mitsubishi MR-J4-15KB servo driver

Mitsubishi PLC (programmable controller) A, R, Q, L, CC-LNK, FX3SA, FX3G, FX3G, FX3U, FX5U and other series;

Mitsubishi frequency converter A840, E840, F840, E740, D740, D720 series; Mitsubishi touch screen GT2000 series; Mitsubishi servo motor JE, J4 series.

Mitsubishi programmable controller: FX3GA, FX3GE, FX3G, FX3U, FX3UC, FX2NC, A, Q, CC-LINK remote module and other series

Mitsubishi variable frequency governor: FR-L700, FR-A700/500, F700/500, E700/500, D700/500, S500 and other series;

Man-machine interface: GOT2000, GOT16, GOT15, GOT12, GOT11, GOT10, A900GOT, F900GOT and other series;

AC servo system: MR-J4, MR-JE, MR-J3, MR-J2S, MR-E, MR-ES and other series;

Tension control system: LE-40MTA (B), LD-FX, LD-50PAU and other series:

Low-voltage electrical appliances: S-N, TH-N, etc.