PE/PP 35/40mm Wheel Style Plastic Spacer Protective Layer of Reinforcing Steel Bar Applied in the Civil

Model/Article No.: wheel style spacer, platform style spacer, safety caps for steel, continuous plastic chair, PVC cone pipe, plastic cone Product Description: Plastic spacer block for protective layer of reinforcing steel bar is designed according to the requirement of national steel concrete construal design norm. It is widely applied in the civil and industrial construction of buildings, roads, bridges, tunnels, airports, subway and so on. Product Character: Having the advantages of high bearing capacity, self locking, crash-proof, good coherence, and easy operation. It is free from the potential quality problems of instable thickness of the protective layer resulting form the use of traditional materials of coprolites and sands. Executive Standards: GBT10-89 Q/SJLX01-2000 Compression Strength: ≥68Mpa Ultimate Load: ≥4.5Mpa What are plastic spacers used for? Plastic spacers are used with reinforcement products. The spacers allow the reinforcement steel to be positioned in the required locations. This can be vertically or horizontally (dependent on type). The space required for mesh and rebar is determined by the requirements of the concrete slab and specification provided by a structural engineer. Why use plastic spacers? Plastic has been found to be one of the most versatile of all building materials. In precast technology it has a major role to play in the maintenance of cover in precast units. It is mandatory to maintain a specific spacing between the reinforcement and the slab face. The variety of precast units has led to a significant array of plasticsolutions being developed, each with characteristics which makes them adapt to specific applications