Mitsubishi PLC temperature control module Mitsubishi Q64TCTTN

Mitsubishi PLC temperature control module Mitsubishi Q64TCTTN

[Accuracy]

Indication accuracy: ambient temperature 25 ± 5 ℃ full scale * (± 0.3%), ambient temperature 0~55 ℃ full scale * (± 0.7%)

. Cold junction temperature compensation accuracy (ambient temperature: 0~55 ℃)

Measured temperature value (PV): above - 100 ℃: within ± 1.0 ℃

Measured temperature value (PV): - 150~- 100 ℃: within ± 2.0 ℃

Measured temperature value (PV): - 200~- 150 ℃: within ± 3.0 ℃

[Sampling period] 500ms/4 channels (fixed value independent of the number of channels used)

[Control output cycle] 1~100s

[Input impedance] 1M Ω

[Input filter] 0s~100s (0: input filter OFF)

[Sensor compensation value setting] - 50.00~50.00%

[Action when the sensor input is disconnected] Processing of exceeding the upper limit

[Temperature control mode] PID ON/OFF pulse or 2 position control

[PID constant range]

PID constant setting: can be set through automatic tuning

. Proportional band (P): 0.0%~1000.0% (0: 2 position control)

. Integral time (I): 0s~3600s (set to 0 in case of P control and PD control)

. Differential time (D): 0s~3600s (set to 0 in case of P control and PI control)

[Target value (SV) setting range] Within the temperature range set in the thermocouple/platinum temperature measuring resistor body used

[Quiet zone setting range] 0.1~10.0%

[transistor output]

. Output signal: ON/OFF pulse

Rated load voltage: 10~30VDC

. Load current: 0.1A/1 point 0.4A/common terminal

. Impulse current: 0.4A 10ms

Leakage current at OFF: below 0.1mA

Voltage drop at ON: DC1.0V (TYP) 0.1A DC2.5V (MAX) 0.1A

. Response time: OFF → ON: less than 2ms ON → OFF: less than 2ms

[Number of nonvolatile memory accesses] * * * More than 10 to the 12th power

[Insulation mode] Transformer insulation between input terminal and PLC power supply and between input channels

[Insulation and withstand voltage]

Between input terminal and PLC power supply: AC500V for 1 minute

. Between input channels: AC500V for 1 minute

[Insulation resistance]

Between input terminal and PLC power supply: DC500V 20M Ω or more

Between input channels: DC500V above 20M Ω

[Heater disconnection detection specification]

. Current sensor:

. Input precision:

. Alarm delay times:

[I/O occupied points] 16-point 1 slot (I/O allocation: intelligent 16-point)

[Connection terminal] 18-point terminal block

[Applicable wire size] 0.3mm2~0.75mm2

[Applicable to crimping terminal] R1.25-3 (crimping terminal with bushing cannot be used)

[Internal consumption current] 0.29A

[Overall dimension W * H * D] 27.4 * 98 * 112mm

[Weight] 0.20kg

Q64TCTTN, Q64TCTTN price, Q64TCTTN user manual, Q64TCTTN external connection

1. Mitsubishi full series PLC, frequency converter, human-machine interface, servo system.

2. Xinjie PLC, frequency converter, human-machine interface and servo system.

3. Delta PLC, frequency converter, human-machine interface and servo system.

4. Wellington human-machine interface and Hytec human-machine interface.

Mitsubishi servo motor HG-JR15K1MB;

Mitsubishi servo motor HG-JR11K1MB;

Mitsubishi servo drive MR-J4-11KA

Mitsubishi servo drive MR-J4-11KB

Mitsubishi servo drive HG-KR-23J with oil seal

Mitsubishi servo store HG-KR053

Mitsubishi servo motor HG-KR73BJ with oil seal

Mitsubishi servo motor HG-SR102BJ with oil seal

Mitsubishi MR-J4-15KB servo driver

Mitsubishi PLC (programmable controller) A, R, Q, L, CC-LNK, FX3SA, FX3G, FX3G, FX3U, FX5U and other series;

Mitsubishi frequency converter A840, E840, F840, E740, D740, D720 series; Mitsubishi touch screen GT2000 series; Mitsubishi servo motor JE, J4 series.

Mitsubishi programmable controller: FX3GA, FX3GE, FX3G, FX3U, FX3UC, FX2NC, A, Q, CC-LINK remote module and other series

Mitsubishi variable frequency governor: FR-L700, FR-A700/500, F700/500, E700/500, D700/500, S500 and other series;

Man-machine interface: GOT2000, GOT16, GOT15, GOT12, GOT11, GOT10, A900GOT, F900GOT and other series;

AC servo system: MR-J4, MR-JE, MR-J3, MR-J2S, MR-E, MR-ES and other series;

Tension control system: LE-40MTA (B), LD-FX, LD-50PAU and other series:

Low-voltage electrical appliances: S-N, TH-N, etc.