HAWKERPZS AX12-45 AX12-100 AGV BATTERIES

HAWKERPZS AX12-45 AX12-100 AGV BATTERIES

HAWKERPZS AX12-45 AX12-100 AGV BATTERIES

Hawk AGV battery AX series

Mobile machines, including various mobile intelligent robots and AGV cars, are powered by batteries. In order to ensure the continuous, stable, safe and reliable operation of mobile machinery, it is very important to reasonably configure the power supply and select batteries with high efficiency and low cost.

Hawk Power Supply Co., Ltd. is an advanced power supply manufacturer. In order to meet the requirements of emerging applications, with its advanced manufacturing equipment and technology, the latest patented technology and materials, it is specially designed for the mobile mechanical power absorption (AGM) AX series maintenance-free lead-acid sealed battery. This series of batteries are produced in strict accordance with the battery standard, which not only strengthens the deep cycle discharge and fast charging capacity, but also improves the safety and reliability of use, without damage to equipment and environment, and without pollution.

Contact Wang Zelong for details.

Compliance with standards

● Product design conforms to international standard IEC 60896/21-22

● According to the Eurobat guidelines released in 1999, this series of products belong to the category of "long life"

● Comply with Telcordia SR-4228

● UL certification (UL standard 1989)

● Approved as non-dangerous goods suitable for land, sea and air transportation according to the U.S. DOT Regulation 49 and ICAO ICAO and IATA Packaging Directive 806

● Manufactured in the factory of Hawk Power Supply Co., Ltd. which has passed ISO 9001:2000 and ISO 14001:2004 certification

Hawk battery AX series specifications and technical specifications

type

Range

AGM (adsorption) AX series

AX12-18

AX12-26

AX12-33

AX12-45

AX12-60

AX12-75

AX12-100

AX12-120

AX12-150

AX12-180

AX12-200

Single voltage

12V

Rated capacity

（25℃）

18AH

26AH

33AH

45Ah

60Ah

75Ah

100Ah

120AH

150AH

180AH

200AH

Internal resistance (m Ω)

ten

eight

nine

seven

six point five

six

five

four point five

four

four

three point eight

Single

size

length

(mm)

one hundred and eighty-one

one hundred and sixty-six

one hundred and ninety-five

one hundred and ninety-eight

two hundred and sixty

two hundred and sixty

three hundred and eight

four hundred and eight

four hundred and eighty-five

five hundred and thirty

five hundred and twenty-two

width

(mm)

seventy-seven

one hundred and seventy-five

one hundred and thirty

one hundred and sixty-six

one hundred and seventy

one hundred and seventy

one hundred and seventy

one hundred and seventy-seven

one hundred and seventy

two hundred and ten

two hundred and forty

height

(mm)

one hundred and sixty-eight

one hundred and twenty-five

one hundred and eighty

one hundred and seventy

one hundred and eighty-five

two hundred and thirty-five

two hundred and fifteen

two hundred and twenty-five

two hundred and forty

two hundred and fifteen

two hundred and twenty-five

Weight (kg)

five point nine

nine

ten point two

fourteen point six

twenty point two

twenty-three point five

thirty

thirty-six point five

forty-seven

fifty-three

sixty-three

short-circuit current

（A）

nine hundred

nine hundred

one thousand one hundred and fifty

one thousand two hundred and fifty

one thousand four hundred and fifty

one thousand seven hundred and fifty

two thousand and three hundred

two thousand four hundred and twenty

two thousand nine hundred and fifty

three thousand three hundred and fifty

three thousand seven hundred and fifty

Maximum emissions

Current (A)

one hundred and eighty

two hundred and sixty

three hundred and thirty

four hundred and fifty

six hundred

seven hundred and sixty-five

one thousand and twenty-five

one thousand and two hundred

one thousand five hundred and ten

one thousand eight hundred and fifty

two thousand and one hundred

Maximum charging current (A)

three point six

five point two

six point six

nine

twelve

fifteen

twenty

twenty-four

thirty

thirty-six

forty

Charging voltage: temperature: 25 ℃, floating charge: 13.62V; Fast charging: 14.2V

Suitable temperature: - 10 ℃~40 ℃

Recommended temperature: 20 ℃~25 ℃

Deep cycle discharge times: 50% DOD more than 1200 times; More than 800 times 80% DOD

terminal

M5

M5

M6

M6

M6

M6

M8

M8

M8

M8

M8

The correct use of Hawk lead-acid power AGV battery can ensure the safe and reliable power supply of the system, and the battery can also reach the longest service life.

Pay special attention to the following items when using Hawk lead-acid power AGV battery:

1. New and old batteries cannot be mixed! The internal resistance of the new and old batteries is different. When used in combination, the single voltage of the new and old batteries is different, which is easy to accelerate the battery damage.

2. Prevent over-discharge of battery. When the battery discharge reaches the rated capacity or the voltage of 12V single battery has dropped to 10.8V, the discharge shall be stopped immediately. (Note: The power supply system must be equipped with low voltage protection for the battery. The protection voltage is 23V, which can extend the service life of the battery).

3. When the battery pack is used, especially when charging, there should be enough space between the battery cells to dissipate heat. The larger the battery capacity, the larger the gap. There should be a gap of at least 1 cm between the battery and the battery.

4. Select appropriate and high-quality charging equipment for charging. Overvoltage and over-current charging are not allowed. The charging ambient temperature should not be higher than 30 ℃. If the ambient temperature is too high, the fan should be used for forced cooling during charging.

5. After the battery pack is discharged and used, it should be charged within 24 hours. The battery should be fully charged before use each time. If the battery is not charged for a long time, the inner plate of the battery will be sulfated. This damage cannot be reversed. In serious cases, the current will not be fully charged, the capacity will drop, or even be completely scrapped.

6. Properly maintain the battery

The output voltage and current of the charging equipment shall be checked regularly with an accurate ammeter. The current and voltage settings of the charging equipment shall not be adjusted without the guidance of professional personnel to prevent misoperation.

The maintenance-free battery does not need to be maintained by adding acid and water. It does not need maintenance management. In order to ensure the good use of the battery, it is necessary to do some necessary maintenance work, such as:

6.1 When the battery is used or stored, it is strictly forbidden to connect the positive and negative poles of the battery with conductive objects to cause short circuit. The short circuit current of the battery is large, which can cause serious injury to human body.

6.2 The battery surface shall be kept clean and dry to prevent self-discharge or impurities from entering the battery.

6.3 The battery is charged before leaving the factory. Generally, the user can directly load it for use. If it has been stored for a long time (more than 2 months), it should be recharged before use.

6.4 If the battery is not used for a long time, it should be fully charged and then stored. If it is not used for more than 3 months, it should be recharged.

6.5 The battery should be stored in a ventilated, dry environment without acid mist, with a temperature of not more than 35 ℃ and a relative humidity of not more than 75%.

6.6 If the battery packaging is accidentally wetted by water during storage or transfer and transportation, the outer packaging should be removed immediately to prevent the water-wetted packaging box from becoming a conductor, causing battery discharge or burning battery terminals.