Bentley, Nevada 3300/16-15-01-03-00-00-00 Vibration monitoring module

Vibration monitoring protection

Vibration monitoring protection is a timely, accurate and effective method to protect equipment and operation safety. The safety control of equipment and operation can be realized by setting the safety protection parameters. When a fault occurs in the system, you can find it and take measures to quickly rectify the fault. It has good self - recovery ability and reliability. It plays an important role in preventing and reducing accidents.

1. When the equipment is faulty, take immediate measures to eliminate the fault and avoid the accident.

When the equipment is faulty, remove all components of the equipment immediately, cut off the power supply, cut off the overall power supply, and close the relevant valves. When a device fails, immediately cut off the power supply to all devices and cut off all electrical equipment around the device. When a device is faulty, move it to a safe area immediately and remove the device from the dangerous area to prevent accidents. When a fault occurs, stop the operation of the device immediately and take necessary measures to eliminate the fault. If a sudden explosion occurs when the equipment is faulty, the accident will damage the equipment and damage the equipment. Technically, devices are usually connected to other devices in the surrounding space and connected to a larger network. After the explosion, there may be gas leakage or other special circumstances on the equipment.

------------------------------------------------------------------------------------------------------------------------------

Xiamen Xiongba Electronic Commerce Co. LTD

FROM：Mr. Wei

E-Mail：2322181769@qq.com

TEL/WeChat:15396237607

2. It has strong self-recovery ability and reliability, which plays an important role in equipment and operation safety.

The vibration monitoring and protection device can realize reliable self-recovery, so as to reduce the damage of equipment and improve the safety of operation. The equipment shall be periodically tested for vibration as required. In general, the vibration monitoring protection device can be automatically activated when the equipment fails. Vibration monitoring and protection device must have good self-recovery ability and reliability, can immediately restore the normal operation of the equipment in case of failure. If the self-recovery capability is not good, the equipment will continue to operate, so the vibration monitoring equipment should be regularly maintained and serviced. After maintenance and maintenance of the equipment, the equipment must be regularly monitored and overhauled. In case of equipment failure, measures should be taken immediately to rectify the fault as soon as possible to prevent the expansion of the accident.

————————————————————————————————————————————————————————————

---------------------------------------------------------------------------------------------------------------------------------------------

If you need to inquire or purchase ,please send the product models to my email or call me directly .

Contact detail:Mobile/ WeChat/ WhatsApp:+86-15396237607

E-mail:2322181769@qq.com

QQ: 2322181769

3. According to the system running status, dynamically and automatically adjust the monitoring and protection parameters, so that it can reach the best state.

In order to make the vibration detection protection more superior, the safety protection parameters should be set in strict accordance with the regulations to make it adapt to the safety requirements of various types of equipment, such as motor, reducer, crane, automobile and aircraft. To ensure the normal operation of the device and prevent accidents, protect the device. If the vibration monitoring and protection equipment has met the design requirements, it must be checked regularly; The equipment parameters have been set and can be adjusted at any time; The detection method should be timely and accurate. Detection equipment should be able to automatically detect and alarm; Equipment parameters should be automatically set in the specified safety state; Setting requirements should be able to automatically execute, and make the various parameter Settings meet the safety requirements; Equipment with testing function must be checked regularly. The inspection contents include vibration measurement parameters and control parameters.