XNR-400E Electrical Touch Screen MFR MVR Melt Flow Indexer

XNR-400E Electrical Touch Screen MFR MVR Melt Flow Indexer

1. Product introduction:

This is a high-precision melt flow rate meter tester. It is used to determine the temperature and load of various plastics and resins passing through a certain temperature and load in a viscous flow state. It passes through the standard die melt flow rate MFR/MVR value every 10 minutes. It is suitable for It is suitable for engineering plastics such as polycarbonate, polyarylsulfone, fluoroplastics, nylon, etc., which have higher melting temperatures. It is also suitable for polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, and polyoxymethylene ( POM), polycarbonate (PC) resin and other low melting temperature plastic testing, widely used in plastic production, plastic products, petrochemical industries and related colleges, scientific research units and commodity inspection departments.

2. Implementation standards:

GB/T3682-2000 Thermoplastic plastic melt flow rate and melt volume flow rate determination

ISO 1133:1997 Thermoplastics Melt Mass Flow Rate MFR and Melt Volume Flow Rate MVR Determination

ASTM D1238 Standard Test Method for Measuring Thermoplastic Melt Flow Rate by Extrusion Plastometer 

3. Main technical parameters:

Temperature range: 0℃-450℃

Temperature fluctuation: ±0.2℃

Temperature uniformity: ±1℃

Temperature display resolution: 0.1℃

Time display resolution: 0.1S

Barrel diameter: Φ2.095±0.005mm

The length of the discharge port: 8.000±0.025mm

The diameter of the charging cylinder: Φ9.550±0.025mm

Weight accuracy: ±0.5%

Output mode: micro automatic printout

Cutting method: manual and automatic cutting

Test load: a total of 8 levels, 8 sets of weights

Power supply voltage: AC220V±10% 50HZ