Nylon Plastic Sheet for Making Gear And Gasket Seal

nylon plastic sprockets gear

nylon plastic sprockets gear  is the generic name for a family of long-chain polymeric amides. General characteristics of the nylons include toughness, strength, abrasion and fatigue resistance, low coefficient of friction, resiliency and heat resistance. Many of these properties can be enhanced by the addition of fillers such as molybdenum disulphide. Nylons are resistant to hydrocarbons, alkalies, keytones and esters.

Features and benefits of Nylon:

•  Very high sliding properties
• High mechanical strength
• Good fatigue resistance
• Excellent wear resistance
• Absorbs moisture, therefore, cannot be used underwater
• High impact strength and toughness
• Low Power factor requirements
• High wear resistance

Uses of Nylon:

   Natural nylon is an excellent food grade plastic

   Black nylon is used where lubrication is required

• High load bearings                                     
• Wear pads                                                
• Support and guide wheels
• Conveyor and tension rollers
• Wire rope sheaves
• Buffer pads
• Gears, etc.
• High impact wear parts
• Bushes

Nylon is available in the following sizes 

Nylon Sheet extruded

Thickness: 1 - 6mm
Sizes: 2000 x 1000mm,600x1200mm ,1000x1000mm,1200x2400mm
Nylon Rod (Extruded)
Outside Diameter: 5 - 50mm

 Nylon sheet ( Cast)

Thickness:10mm-100mm

Size: 2000 x 1000mm,600x1200mm ,1000x1000mm

Nylon Rod (Cast)

Outside Diameter:  50 – 350mm

Nylon Tape Rolls
Thickness: 0.5 and 0.8mm in rolls 1000mm wide

Color: Green,Blue,White, Black, Yellow

Application