Japanese Latest Automatic Little Manual Iron Entrance Laser Cut Metal Main Craft Fence Door Gate Steel Garden Design

.The gate is made by aluminum alloyed/ iron/ stainless steel profiles and casting aluminum ornaments which will be anti-corrosion and never get rusty.
.The gate is assembled by aluminum soldering to make it durable and strong without any change.
.The surface treatment is by powder coated with various colors for choice and many procedures to assure of no color fading.
.All of the products are customized size according to project requirement and confirmed by detailed drawing.
.The various designs of decorative casting aluminum pieces make gate richer.
.It's easy installation and wide suitable for different environments, also different types of gate motor available for choice.

Features:

1.Hot-dipped galvanizing. Anti-rust as long as 50 years.

2.Two layers automotive acrylic painting. No need refurbishment every year.

3.Electrophoresis and powder coating for small parts and accessories. Smooth surface as silk.

4.European style, 3D engraving technique, decorative inlaid pattern.

5.Seamless design,production , capable of theft proof.

6.Durable and  easy to Install, environmental-friendly, never rust .

7. less cost to maitain,almost none.

8.does not warp, crack, or twist, aluminum is resistant to decay by insect attack, fungi or other disease.

9.Temperature resistance: Within the scope and -40 to +120 degrees Celsius does not cause deformation and degradation phenomenon.

10.Many colors available. Both have natural woodiness feeling and wood texture, and can according to your own personality to customize the color you need.

11.can resist all kinds of external shocks, not broken, do not collapse, not dumping, safety is extremely high.

Recommended Products                                            

Measurement guidelines
As you can see from below picture: there are 3 parts for the measurements:1,2,3 
1.spor 2 is the lowest point of the gate (this spot should be at the same level with the pillar) 
2.spot 3 is the net distance between the two pillars. If you want to install the gate on the outside of the pillars, please tell us in advance, so we can adjust the measurement. 
3.spot 1 is the highest point of the gate. Normally it is 30-50cm higher than spot 2.

Product Recommendation

Case Show

Production Process

Since the wrought iron gate belongs to the metal material, it needs to be lacking in corrosion resistance. Therefore, in the production and production process, it is necessary to carry out anti-rust treatment, and the whole hot-dip galvanizing is adopted. After the gate is produced, we will carry out anti-rust treatment to let the gate The service life is longer.

Show Room

Our Factory

 Certificates 

FAQ

1. How about the MOQ?
1 set.

2. Are you manufacturer or trading company ?
We are the manufacturer of staircase, balustrade / railing, we also supply aluminum doors and screens for more than 10 years.
Before delivery, we will have a Installation Test of your purchased goods. We do that to make sure all we offer are in good condition, that is the perfect quality we want to control.

3. What should I provide for a courtyard gate quote?
1) Pls tell us what style or product you like.
2) Provide Some photos and plan drawings.
3) If you have any other special requirements, pls contact us.

4. How to install a courtyard gate?
will use sink head explosion bolts for the installation.and if you supply the project layout and measurements, we will offer shop drawings and provide all the items needed,so you do not need to bother to buy other extra items .and our products do not neet to welding, just use screws.

5. What is your payment?
30% as deposite,70% balance before shipment,we accept T/T,L/C,western union,paypal.

6. What is the delivery time if I make order?
Every product needs to be customized, so the normal delivery time is 30-35 days of receipt of the final payment,ortherwise about 40 days.

  << BACK TO HOME PAGE >>