High Temperature Annealing Oven/aging Furnace For Metals

Annealing Furnace

The CDOCAST annealing furnace is a type of equipment specially designed for annealing precious metals.
The heating principle USES high temperature resistance wire heating, making the heating temperature more uniform, the whole heating process can be controlled.

The annealing furnace has a cooling tank.
Thus, the annealed workpiece can be cooled rapidly after heating, and the whole annealing process can be performed under an inert gas (nitrogen protection)

1:Uniform heating with minimum difference of temperature.

2:The entire annealing is completed in inert gas protection, the workpiece does not have oxide scale, which can greatest guarantees the quality of workpiece

3:Small foot print design , no need to send engineers to debug, end-user can install by themselves

4:Heating Temperature curve program can be set

5:Installed with a timer, you can set the start-up time at any time.

6:Optionally, an ammonia heating and decomposing unit is available, allowing direct annealing with ammonia

Our services

I.Commissioned from the furnace after delivery, into the warranty period, the warranty period of 12 months.Regardless of the warranty period or warranty period, the furnace, such as failure, received a notice, we are committed to 36 hours to send to the scene to deal with.

II.In the warranty period by our cause cause failure, we carried out unconditional maintenance and replacement.Due to other causes of the failure, we only charge the cost of paid maintenance.

III.After the warranty period, we will, as always, do a good job after-sales service, so that users no worries.

1. What is your advantage to compared to others?

 First, we provided turnkey solution ,Cost-effective,highly efficient, durable and easy-to operate machine is what we deliver.

Second, we have Strict Quality Control System,Before Being dispatched from our factory all of our equipment will undergo a series of strict test,including the appearance quality test, voltage electrical test, aging test also the package strength checking

2. If our machine meets fault, how could you help us to solve it?

For failures caused by using process, we will send our aftersales engineer to discuss with you, and you should provide the video how the machine is broken,we will find out which part of the machine is broken and then we will send you the broken part By Dhl.

3. what is your warranty?

Our warranty period comes from the machine begin to run normally and we will provide the whole life technology support to you for free.

All products sold by COOLDO In warranty period,we will provide you the spare parts for free. Our engineer will help you do the aftersales through our remote control system.When out of one year warranty time, we will provide the spare parts with the cost price for the whole machine lifetime.