12mm Rod End Bearing M12x1.75mm Rod Ends Ball Joint Female Thread Bearing SI12T/K SIL12T/K

Product introduction:

The joint bearing is a spherical plain bearing, and the basic type is composed of inner and outer rings having a spherical sliding spherical contact surface. The joint bearing is mainly composed of an inner ring with an outer spherical surface and an outer ring with an inner spherical surface, which can withstand a large load. Depending on their type and construction, it is possible to withstand radial loads, axial loads or combined loads of radial and axial forces. Since the outer surface of the inner ring is provided with a composite material, the bearing can be self-lubricated during operation.

Joint bearing feature : 

1. Enable high reliability and high precision on thread Inch series rod end bearings ; 
2. Sustain heavy loads with low noise and high stiffness;
3. Perform under almost any environmental conditions and load capacities to satisfy a wide range of  applications.  

Joint bearings can be used for:

engineering hydraulic cylinder, forging machine tools,engineering machinery, automation equipment, automobile shock absorber, water conservancy machinery industries, etc.